Conf. file voor Philips BDP5200/12

Discuss alternative media renderers (not PS3) supported by PS3 Media Server (e.g. Xbox 360, TVs &c.)

Conf. file voor Philips BDP5200/12

Postby TonGijzen » Sat Mar 17, 2012 1:43 pm

Code: Select all
# ps3mediaserver renderer profile for Philips Bluray BDP5200/12
# Refer to PS3.conf for help
# The protocol string is (for mpeg2) :
# http-get:*:video/mpeg:DLNA.ORG_PN=MPEG_PS_PAL

# General informations / detection # General informations / detection
# Added Aurea.png to ps3.jar with winrar
RendererName=Philips Bluray5200

# UserAgent: regular expression to detect the connected renderer
# Renderer name string:  Allegro-Software-WebClient/4.61 DLNADOC/1.00
UserAgentSearch=UPnP/1.0 DLNADOC/1.50

# Basic capabilities

## DLNA settings

##Use the DLNA feature seek by time and not by range
# SeekByTime=true

## Transcoding/Muxing capabilities

##Transcode codecs for video and audio engines #
##currently supported: MPEGAC3 or WMV for video, PCM or MP3 for audio

##Max Width and Height supported by the media renderer (0=unlimited)

#Does music files need to be resampled at 44.1kHz?

#Does the client need to receive transcoded video with minimal delay ? (Useful when the client has a small timeout delay)

#Size of the transcoded file (unknown length) sent to the renderer (could determine browsing failure/success)
#Possible values:
#           -1: Specific value working with the PS3, means perfect transcoding and copying support (it's against the dlna spec though)
#            0: size attribute is NOT sent to the renderer (defaut value if this parameter isn't used)
# 100000000000: 100Gb, if you want to be sure that the media file is not cutted before the end ?

## Extensions management: no need to put something here, as the server's default configuration is tuned for ps3
## What extensions are forcefully streamed as is (and not transcoded)
Last edited by chocolateboy on Tue Mar 20, 2012 9:27 pm, edited 1 time in total.
Reason: reformatted
Posts: 1
Joined: Sat Mar 17, 2012 1:26 pm

Re: Conf. file voor Philips BDP5200/12

Postby Evagelion » Sat Mar 09, 2013 4:30 am


I copy and pasted your CONF. info to a text document and saved it as Philips BDP5200.conf. I loaded PS3 media player and turned on my BDP5200/98, but I can't see the media player, neither can the program see my blue ray player.

I reloaded the program, restarted the server. Waited around for 5 minutes. Nothing helped to make the two connect to each other.

Any suggestion would be greatly appreciated.
Posts: 2
Joined: Sat Mar 09, 2013 4:27 am

Return to Alternative Media Renderers

Who is online

Users browsing this forum: No registered users and 1 guest