I have 2 networkcards and must have 2 session of PMS

For help and support with PS3 Media Server in general
Forum rules
Please make sure you follow the Problem Reporting Guidelines before posting if you want a reply.

I have 2 networkcards and must have 2 session of PMS

Postby IRATA » Mon Dec 24, 2012 8:30 pm

Hello people

I just hope that I'm right here. If not, please do not equal stoning ...

Have on my Windows Home Server (WHS) to run the PMS as the Windows native version of the view to the client is totally useless in my opinion. The PMS shows beauti everything to the way I've sorted it on my server and without having to put on my space of time.
Now I have the following problem.

In WHS are 2 network cards, as well as 2 separate networks depend on WHS (2 apartments with separate networks and IP ranges).
To this end, I have the PMS also 2 times installed in different directories.
I can now start the PMS, it assigns an IP address to determine and save the whole thing. All this, I repeat after the start of the other installation and forgive where desired, different IP address and save it as well.
That works pretty well so far and just as long until the server is restarted times. Then there are still 2 installations, but both saved only with the last settings.
The reason I've found, the configuration is in a stored on the chosen installation location independent, common directory.
Since I was asked why I did it at all, the option to select a new directory?
But now to my question ...

Is there a way to configure it so that each instance only their settings (such as IP address, shared directories, etc) loads, or, if this were not possible, you can then in an instance and access more than 2 different IP addresses to allow? Then I could just share only the directories that should be shared by all.
Option 1 would make more sense

I just hope I have expressed myself as reasonably understandable.
IRATA
 
Posts: 3
Joined: Mon Dec 24, 2012 8:27 pm

Re: I have 2 networkcards and must have 2 session of PMS

Postby meskibob » Tue Dec 25, 2012 3:04 am

I provide NO application support via PM or email, so please post your question to the forum per the Forum Rules.
meskibob
Moderator
 
Posts: 4768
Joined: Mon Jan 19, 2009 4:11 pm

Re: I have 2 networkcards and must have 2 session of PMS

Postby IRATA » Tue Dec 25, 2012 2:08 pm

Thanks

but I can not find the option, to change the profil-directory, or running 2 versions for 2 Networkcards.
My English is not so good, I think, I have not found the part for my question.

Please help me

thanks

IRATA
IRATA
 
Posts: 3
Joined: Mon Dec 24, 2012 8:27 pm

Re: I have 2 networkcards and must have 2 session of PMS

Postby IRATA » Sun Dec 30, 2012 11:13 am

Hi

PS3-MediaServer - project is dead, I use another software. Now, I must not fight to find a way to use more as one ethernet-cards.
In the new software, I can say, which device or IP-address, I don't want to use. That is the better way.

MfG
IRATA
 
Posts: 3
Joined: Mon Dec 24, 2012 8:27 pm

Re: I have 2 networkcards and must have 2 session of PMS

Postby mazey » Sun Dec 30, 2012 11:16 am

dead? coming version already includes so far.

Code: Select all
Changelog:
==========

1.80.0 - 2012-??-??

    Regressions:
        - Re-allow all transcode engines to be disabled
    PMS.conf:
        - ffmpeg has been renamed ffmpeg_video_custom_options and now defaults to null
    Renderers:
        - Document TranscodeVideo and TranscodeAudio profiles
        - Panasonic TVs: Add "exclusive" option to SeekByTime to work around a transcoding issue
        - PS3: Restore seek-by-time support for streaming
        - Android: allowing chunked transfer
        - AirPlayer & iPad/iPhone: transcoding to WMV format gives better results
        - Added support for Philips HTS (thanks, leroy!)
        - Improved support for Sony Bravia HX (thanks, mazey!)
    Engines:
        FFmpeg Video and FFmpeg Web Video:
            - support all three TranscodeVideo profiles: WMV, MPEGTSAC3 and MPEGPSAC3
            - preserve source video quality
        FFmpeg Video:
            - custom FFmpeg options are now read before each transcode rather than only at startup (parity with custom MEncoder options)
            - rescale videos larger than the renderer's max height/width
        FFmpeg Audio: support all TranscodeAudio profiles
    Language updates:
        - Updated Brazilian translation (thanks, Bruno Arueira)
    Misc:
        - fix bug that prevents PMS running multiple profiles concurrently
        - fix NPE when responding to DLNA subtitle requests
        - image thumbnailer:
            - add thumbnail support for TIFF and other formats
            - trap exception when handling unsupported formats
        - fix response to M-SEARCH "ssdp:all" message (thanks, ler0y!)


Misc:
- fix bug that prevents PMS running multiple profiles concurrently

is that what u wanted looks like its in the next version lol
PMS 1.90.2 SNAPSHOT - HP Proliant Microserver N54L 2.2Ghz - Windows Home Server 2011 (64bit) 8GB - Bravia KDL55HX750
mazey
 
Posts: 771
Joined: Sat Oct 24, 2009 9:07 am


Return to General Help and Support

Who is online

Users browsing this forum: Yahoo [Bot] and 11 guests