Sony Bravia 2012 series

[mazey]

Bravia HX conf file attached based on braviaex.conf just replace in renderers folder its for applicable models below though, streams formats the tv will play without issues and transcodes formats which are incompatible

default conf file would transcode everything, so decided to make my own tested this for months will work for everything u throw at it.

feedback appreciated.

list of supported formats if anyone wants to try and improve this or sees any error.

http://www.sony.com.au/support/compatib ... dl-55hx750

Applicable Models

KDL-26EX550, KDL-32EX550, KDL-32EX650, KDL-32HX750, KDL-32HX753, KDL-32HX75A, KDL-40EX650, KDL-40HX750, KDL-40HX753, KDL-40HX75A, KDL-40HX850, KDL-40HX853, KDL-40HX855, KDL-46EX650, KDL-46HX750, KDL-46HX753, KDL-46HX75A, KDL-46HX850, KDL-46HX853, KDL-46HX855, KDL-55HX750, KDL-55HX753, KDL-55HX850, KDL-55HX853, KDL-55HX855, KDL-55HX950, KDL-55HX955, KDL-65HX950, KDL-65HX953, KDL-65HX955

Update: PMS 1.80 will include support for HX series of bravias so no conf file will be needed. unless you are using a EX model listed above then u can grab the config file from the below post and just replace.

[mazey]

Updated Bravia HX config to stream everything the tv supports including avi/mp4/mpg.

Code: Select all

# ps3mediaserver renderer profile for Sony Bravia HX series
# Refer to PS3.conf for help

RendererName=Sony Bravia HX
RendererIcon=braviaex.png
#===========================================================
# Reported identifying headers:
# X-AV-Client-Info: av=5.0; cn="Sony Corporation"; mn="BRAVIA KDL-32CX520"; mv="1.7";
#===========================================================
#UserAgentSearch=
UserAgentAdditionalHeader=X-AV-Client-Info
UserAgentAdditionalHeaderSearch=(BRAVIA KDL.+EX[3457])|(BRAVIA KDL.+[CHN]X[578])
Video=true
Audio=true
Image=true
SeekByTime=true
TranscodeVideo=MPEGPSAC3
TranscodeAudio=LPCM
DefaultVBVBufSize=true
MuxH264ToMpegTS=true
MuxDTSToMpeg=false
WrapDTSIntoPCM=false
MuxLPCMToMpeg=false
TranscodeFastStart=true
MaxVideoBitrateMbps=0
MaxVideoWidth=0
MaxVideoHeight=0
H264Level41Limited=true
MimeTypesChanges=audio/wav=audio/L16|video/mp4=video/mpeg
DLNALocalizationRequired=true
#TranscodeExtensions=dvr-ms,dvr,mkv,dv,ty,mov,ogm,hdmov,hdm,rmv,rmvb,rm,asf,evo,asx,flv,m2v,mpe,mod,tivo,ty,tmf,ts,tp,m2p,mp4,m4v,avi,wmv,wm,divx,div,flac,mlp,fla,wma,m4a,aac,dts,mka,ape,ogg,shn,mpc,ra,mp2,wv,oma,aa3,gif,png,arw,cr2,crw,dng,raf,mrw,nef,pef,tif,tiff
#StreamExtensions=

# For Bravia TVs and Sony Bluray players
ForceJPGThumbnails=true

MediaInfo=true
CreateDLNATreeFaster = true
# [Supported video formats]:
# Here we declare support (or lack) of DTS (here, none of the entries declare dts as a supported audio codec)
Supported = f:mpegps|mpegts v:mpeg1|mpeg2|mp4|h264 a:ac3|lpcm|aac|mpa m:video/mpeg
# No H264 for AVI files, plus specific mediainfo attributes, for better auto detection (qpel and gmc are not supported here)
Supported = f:avi|divx v:mp4|divx|mjpeg a:mp3|lpcm|mpa|ac3 m:video/x-divx qpel:no gmc:0
Supported = f:mp4 v:mp4|h264 a:ac3|aac m:video/mp4
# WMV files are supported, but not with 5.1 audio: (hence the n:2)
Supported = f:wmv v:wmv|vc1 a:wma n:2 m:video/x-ms-wmv
# [Supported audio formats]:
Supported = f:wav a:dts|lpcm n:6 s:48000 m:audio/wav
Supported = f:wav n:2 s:48000 m:audio/wav
Supported = f:mp3 n:2 m:audio/mpeg
# Apple lossless not supported
Supported = f:aac n:2 a:(?!alac).+ m:audio/x-m4a
Supported = f:wma n:2 m:audio/x-ms-wma
Supported = f:atrac n:2 m:audio/x-oma
# [Supported image formats]
Supported = f:jpg m:image/jpeg
Supported = f:png m:image/png
Supported = f:gif m:image/gif
Supported = f:tiff m:image/tiff

BraviaHX.rar

BraviaHX CONFIG FILE

(1.23 KiB) Downloaded 818 times

just for reference the transcode line is #'d out meaning it wont transcode those things and skip right down to media info checks.

DEVS: if devs want to add this to the official build you can but would need to edit the headers for EX and HX to keep them seperate, sorry i suck at header information. ive been testing this nonstop and it works great. HX is the 2012+ series of tvs from sony so they will be around for awhile to come. the only change i really made was #'ing out the transcode line so it would stream supported files the problem is if u do this to the braviaex.conf file then bravia ex's dont support avi and mp4 so really do need a EX and HX seperate config both the same the only difference is HX can stream avi and mp4 and EX cant (well most of them) basically if u leave EX how it is and just add HX and fix the headers up then # out the transcode extentions on the braviaHX.conf everything will be great.

BraviaHX PIC FILE

BraviaHX.png (39.61 KiB) Viewed 2067 times

[Raptor399]

Thanks for the effort!

I would like to know what headers your TV is sending to PMS though.
Can you remove all renderer.confs and paste the possible identifying headers that PMS reports in the debug.log when you try to connect to it?

[mazey]

here you go.

Code: Select all

INFO  2012-12-29 20:08:43.135 [New I/O server worker #1-6] Media renderer was not recognized. Possible identifying HTTP headers: User-Agent: UPnP/1.0 DLNADOC/1.50, X-AV-Client-Info: av=5.0; cn="Sony Corporation"; mn="BRAVIA KDL-55HX750"; mv="1.7";, X-AV-Physical-Unit-Info: pa="BRAVIA KDL-55HX750";

[Raptor399]

Thanks!

The "BraviaEX.conf" matches EX, CX, NX and HX headers.
I take it only the HX needs to move to this new config and the rest should remain where it is?

[mazey]

NX is 2010 EX is 2011 and CX is way older then that, yep HX is 2012+ it makes sense its more supported then the older models so id just keep it separate, later we can prob add the newer models to the HX conf thinking ahead.

double checked also because wasnt sure on NX (because N comes after H) but yeah its older, it said 2010 model where i looked. it doesnt support avi or mp4.

http://www.sony.com.au/support/compatib ... dl-60nx800

[Raptor399]

Improvement committed. Thanks a bundle for the support!

[mazey]

Improvement committed. Thanks a bundle for the support!

thanks a bunch

[mazey]

just compiled it then (1.80snapshot) and all working properly thanks

[mazey]

hey Raptor399 would it be possible to remove the TranscodeFastStart=true line from the braviahx.conf, has issues with action/trees at the start of HD content and causes it to stutter, its probably safer to buffer abit before playing. it seems to run fine then.