Adjusting brightness level in PMS?

[chocolateboy]

The debug.log file is supposed to be in the same folder as the PS3.conf file

No it isn't. If you want help, read the instructions in the provided links.

[karishh]

I found the files, I've also attached a comparison picture of when a movie is streamed vs. how it looks on the computer.

[karishh]

Here is the debug and config.

[ExSport]

Your debug.log is empty.
Read the FAQ again
Every restart of PMS, debug.log file is rewritten so if you played file and then restarted PMS and uploaded log, it is not correct way

[karishh]

God damn it I checked it before upload! Am I not supposed to run PMS, play the movie, shut down PMS and then upload the debug? Because that's what I did...

[ExSport]

Yes, it is correct way but your log is empty:

Code: Select all

INFO  2012-04-13 00:27:16.394 [main] Using address /192.168.1.3 found on network interface: name:eth5 (Atheros AR8131 PCI-E Gigabit Ethernet Controller (NDIS 6.20) #2)
INFO  2012-04-13 00:27:16.397 [main] Created socket: /192.168.1.3:5001
DEBUG 2012-04-13 00:27:16.824 [main] Sending ALIVE...
INFO  2012-04-13 00:27:16.912 [main] Using the following UUID configured in PMS.conf: 631ebdb3-4c64-4afa-ac0f-2d148476091b
INFO  2012-04-13 00:27:19.573 [New I/O server worker #1-1] No IP filter specified, access granted to /192.168.1.3
INFO  2012-04-13 00:27:19.682 [pool-5-thread-1] Checking IP: 192.168.1.3 for WMP
INFO  2012-04-13 00:27:19.700 [pool-5-thread-1] Renderer WMP found on this address: Kara-Dator (192.168.1.3)
DEBUG 2012-04-13 00:27:19.709 [pool-5-thread-1] Starting ping -n 3 -l 64000 192.168.1.3
INFO  2012-04-13 00:27:21.412 [main] The server should now appear on your renderer
DEBUG 2012-04-13 00:27:21.720 [SpeedStats Failsafe] Stopping process: ping-0
DEBUG 2012-04-13 00:27:21.725 [pool-5-thread-1] Could not parse time from "64000 tid < 1"
DEBUG 2012-04-13 00:27:21.725 [pool-5-thread-1] Could not parse time from "64000 tid < 1"
DEBUG 2012-04-13 00:27:31.414 [UPNP-AliveMessageSender] Sending ALIVE...
DEBUG 2012-04-13 00:27:56.105 [UPNP-AliveMessageSender] Sending ALIVE...
DEBUG 2012-04-13 00:28:09.807 [UPNP-AliveMessageSender] Error while sending periodic alive message: sleep interrupted
INFO  2012-04-13 00:28:09.807 [PMS Listeners Stopper] Sending BYEBYE...
DEBUG 2012-04-13 00:28:12.507 [PMS Listeners Stopper] Forcing shutdown of all active processes
INFO  2012-04-13 00:28:12.507 [PMS Listeners Stopper] Stopping server on host 192.168.1.3 and port 5001...

Log says: Network initialized, WMP detected, nothing played and PMS closed.

[karishh]

That's strange, because i tried it again and the file didn't even change... Could there be another debug.log file? I found this one in C/Program(x86)/PS3 Media Server

[ExSport]

What about to open this log directly from PMS GUI?

[karishh]

God, it was that easy?

[ExSport]

You are not using MEncoder engine(transcoding) but tsMuxeR engine(remuxing)!
For changing brightness you need to reencode/transcode original video so MEncoder parameter will be used.