Config files Philips TV's 2009,2010,2011,2012

Discuss alternative media renderers (not PS3) supported by PS3 Media Server (e.g. Xbox 360, TVs &c.)

Re: Config file Philips TV 40pfl8605h_12

Postby pablo_hp » Sun Mar 25, 2012 11:58 pm

32PFL6615D

Hello.
I Have the Phillips 32PFL6615D.
They dont play MKV videos.
And I have a lot of videos in MKV.
After I Install PS3 Media Server, they erase my old file that I have configured before.
And the new ".Conf" file don´t work right with my files.
Then I modify the original file with the info below.
With thesse configuration the PS3 media server can now trancode the video files to format that my television can understande.
Sorry for my english. I am brasilian.
Thanks.

Code: Select all
# --------------------------------------------------------------------------------------------
# PS3 Media Server renderer configuration profile for the Philips 40pfl8605h_12
# 2010 lcd full hd ambilight tv.
# Revision number 1.6
# Tested with 40pfl8605h_12 with firmware 140.040.000
# Tested with ps3 media server 1.50.0
# Refer to PS3.conf for help.
# By Leo from Holland.
# leroy on forum.

# Histoy:
# --------------------------------------------------------------------------------------------
# version 1.0   First tested version posted.
# version 1.1   Added lpcm to mpegps mpeg2 as a supported audio codec.
# version 1.2   According to the Philips specs from "Codec_table_all.zip" some changes.
#               Added "MaxVideoBitrateMbps = 20".
#               Added Max video bitrate b:4637696 into "Supported = f:mp4 v:mp4".
#               Removed mp4 and aac as supported codec with "Supported = f:mpegts".
# version 1.3   Removed mp4 as supported codec with "Supported = f:mov".
# version 1.4   Changed "MaxVideoBitrateMbps = 20" to 0 (20 is to low for full HD mkv)
#               Changed "RendererName = Philips Tv" to Philips TV
# version 1.5   Removed mov as supported codec.
#               Changes to findings and spelling.
#               Changed MaxVideoBitrateMbps = 75 Max TV native support transcoding to MPEGAC3
# version 1.6   Found a nicer png icon. Thanks bytesp (from Issue 1187)
#               Changed "RendererIcon = philips 40pfl8605h_12.png" to philips-pfl.png
#               Renamed config file "Philips 40pfl8605h_12 1.6.conf" to PhilipsPFL 1.6.conf
#               Thanks Raptor399 For adding the renderer config for future inclusion in PMS.

# Possible supported renderers:
# --------------------------------------------------------------------------------------------
# According the specs from the 'Codec_table_all.xls' downloaded from Philips support,
# it is suitable for the xxPFLxxx5 serie. Not tested by me!

# Specification Philips 40pfl8605h_12:
# --------------------------------------------------------------------------------------------
# Taken from leaflet 15.6.9
#
# Picture playback format: jpeg
# Music playback formats: mp3,wma(v2 up to v9.2),aac
#
# Video playback formats:
# Codec support: h.264/mpeg-4 avc,mpeg 1,mpeg 2,mpeg 4,wmv9/vc1
# Containers: avi,mkv
#
# Taken from manual.
# playback formats:
# jpeg (still pictures)
# mpeg program and transport stream
# mp4
# asf

# Connection info:
# --------------------------------------------------------------------------------------------
# User-Agent obtained from the debug.log file:
# HTTP User-Agent: Windows2000/0.0 UPnP/1.0 PhilipsIntelSDK/1.4 DLNADOC/1.50
# --------------------------------------------------------------------------------------------
# Additional information i have got obtained with the
# "Device Sniffer for UPnP Technologies" program:
# 192.168.2.8 is the ip address of the renderer.
#
# HTTP/1.1 200 OK
# CACHE-CONTROL: max-age=1800
# DATE: Mon, 26 Sep 2011 22:19:40 GMT
# EXT:
# LOCATION: http://192.168.2.8:49153/nmrDescription.xml
# SERVER: Windows2000/0.0 UPnP/1.0 PhilipsIntelSDK/1.4 DLNADOC/1.50
# X-User-Agent: redsonic
# ST: upnp:rootdevice
# USN: uuid:F00DBABE-SA5E-BABA-DADA00903EF2D114::upnp:rootdevice

# Protocol info:
# --------------------------------------------------------------------------------------------
# Mime types obtained with the "device spy for upnP technologies" program:
#
# audio/mpeg:DLNA.ORG_PN=MP3,                           Used for mp2 mp3.
# audio/x-ms-wma:*,                                     Used for wma.
# audio/mp4:*,                                          Used for mp4 aac.
# audio/L16;rate=44100;channels=2:DLNA.ORG_PN=LPCM,     Used for aiff and wav.
# audio/L16;rate=44100;channels=1:DLNA.ORG_PN=LPCM,     Used for aiff and wav.
# audio/L16;rate=48000;channels=2:DLNA.ORG_PN=LPCM,     Used for aiff and wav.
# audio/L16;rate=48000;channels=1:DLNA.ORG_PN=LPCM,     Used for aiff and wav.
# audio/wav:*,                                          Not used. Can be used for wav.
# audio/x-ms-asf:*,                                     Not used.
# audio/vnd.dlna.adts:*,                                Not used.
#
# video/mpeg:DLNA.ORG_PN=MPEG_PS_PAL,      Used for mpegps and can be used for mpegts.
# video/mpeg:DLNA.ORG_PN=MPEG_PS_NTSC,
# video/mpeg:DLNA.ORG_PN=MPEG_TS_SD_EU_ISO,
# video/x-matroska:*,                                   Used for mkv.
# video/x-msvideo:*,                                    Used for avi and divx.
# video/x-ms-wmv:*,                                     Used for vc1.
# video/vnd.dlna.mpeg-tts:DLNA.ORG_PN=MPEG_TS_SD_EU,    Used for mpegts.
# video/vnd.dlna.mpeg-tts:DLNA.ORG_PN=MPEG_TS_SD_EU_T,
# video/h264:*,                                         Used for mp4 and mov.
# video/avi:*,               Not used. Can be used for avi and divx.
# video/x-ms-avi:*,          Not used. Can be used for avi and divx.
# video/msvideo:*,           Not used. Can be used for avi and divx.
# video/x-ms-asf:*,          Not used. Can be used for vc1.
# video/x-ms-asf-plugin:*,   Not used. Can be used for vc1.
# video/mpeg4:*,             Not used. Doesn't work for mp4 or mov. (Instead video/mp4 works)
#
# image/jpeg:DLNA.ORG_PN=JPEG_SM,      Used for jpg.
# image/jpeg:DLNA.ORG_PN=JPEG_MED,
# image/jpeg:DLNA.ORG_PN=JPEG_LRG,
# image/jpeg:DLNA.ORG_PN=JPEG_SM_ICO,
# image/jpeg:DLNA.ORG_PN=JPEG_LRG_ICO,
# image/jpeg:DLNA.ORG_PN=JPEG_TN,

# Findings:
# --------------------------------------------------------------------------------------------
# Additional information about the supported codec can be downloaded
# from the philips supportforum.
# http://www.supportforum.philips.com
# --------------------------------------------------------------------------------------------
# If the video codec is supported and the first audio codec NOT like DTS,
# the video do not play native.
# The 40pfl8605h_12 doesn't support subtitles native. (unless the file be transcoded)
# The 40pfl8605h_12 doesn't support to switch between audio tracks with video files native.
# --------------------------------------------------------------------------------------------
# Audio files that contain a cover image doesn't preview an thumbnail.
# --------------------------------------------------------------------------------------------
# The following codecs are not supported by the 40pfl8605h_12 with my test files.
# They are (by my knowledge) not excludable within the defining of the "Supported"
# formats. So unfortunately they are played incorrect and not transcoded.
#
# video:
# avi mpeg-4 visual with div3 codec id. (divx 3)
# avi mpeg-4 visual with MPG4 codec id.
# avi mpeg-4 visual with MP42 codec id.
# mp4 avc (h264) with format profile baseline@L4.1 and high@L4.1 (birate limited b:4528690)
# mov mpeg-4 quickTime with avc (h264) and format profile main@L4.1 (mov removed version 1.5)
#
# audio:
# wma voice
# wma pro
# wav with dts
# wav with mp3
# --------------------------------------------------------------------------------------------
# .aac audio files into "adts" container play correctly with usb on the 40pfl8605h_12
# and windows media player 12 can stream these files.
# Unfortunately the debug.log file gives the next error when browsing into it
# [New I/O server worker #1-4] INFO 23:46:50.055 The file W:\Muziek\Audio Data
# Transport Stream.aac was badly parsed. It will be hidden.
# Because of this I wasn't able to test next line:
# Supported = f:adts a:aac s:48000 m:audio/vnd.dlna.adts

# Setup:  (Refer to PS3.conf for help for all settings used.)
# --------------------------------------------------------------------------------------------
RendererName = Philips TV
RendererIcon = philips-pfl.png

# Renderer recognition:
# --------------------------------------------------------------------------------------------
UserAgentSearch = PhilipsIntelSDK
# No additional userAgent known.
UserAgentAdditionalHeader =
UserAgentAdditionalHeaderSearch =

# Config settings:
# --------------------------------------------------------------------------------------------
# Enables the use of "Supported" to more accurately define the supported formats
# for the renderer and faster browsing.
MediaInfo = true
# --------------------------------------------------------------------------------------------
# With the 40pfl8605h_12 it is not possible to seek by time.
SeekByTime = false
# --------------------------------------------------------------------------------------------
# On 40pfl8605h_12 working codec for video Transcoding: MPEGTSAC3 , MPEGAC3
TranscodeVideo = MPEGAC3
# On 40pfl8605h_12 working codec for audio Transcoding:  MP3 , LPCM, WAV
TranscodeAudio=LPCM
# --------------------------------------------------------------------------------------------
# Ignored if MediaInfo = true:
MuxH264ToMpegTS = false
MuxDTSToMpeg = true
MuxLPCMToMpeg = true
MimeTypesChanges = audio/x-m4a = audio/mp4
# --------------------------------------------------------------------------------------------
# Best left empty if MediaInfo = true
# Overrides the "Supported" formats:
TranscodeExtensions = m2ts
StreamExtensions =
# --------------------------------------------------------------------------------------------
# Next line doesn't work with my tested jpeg files with exif info.
# (the jpeg pics are not rotated in its original state).
AutoExifRotate = true
# --------------------------------------------------------------------------------------------
# Function taken from WDTVLive.conf
# Show the duration of a dvd iso title in the overview.
ShowDVDTitleDuration = true

# Media renderer capabilities:
# --------------------------------------------------------------------------------------------
Video = true
Audio = true
Image = true
DLNALocalizationRequired = false
CreateDLNATreeFaster = true
ForceJPGThumbnails = true
DefaultVBVBufSize = true
MaxVideoBitrateMbps = 75
H264Level41Limited = false
TranscodeAudioTo441kHz = false
WrapDTSIntoPCM = false
ChunkedTransfer = false
TranscodeFastStart = true
TranscodedVideoFileSize = 0

# Ignored for files matching "Supported" formats.
MaxVideoWidth = 720
MaxVideoHeight = 480

TranscodeExtensions=avi,wmv,mkv,wmv,ts,m2ts,tp,iso,mp4,mov

# Supported formats:
# --------------------------------------------------------------------------------------------
# The "Supported" will only be used if "MediaInfo = true".
# ok will mean that I have tested this codec combination.
# ? will mean that I have no test files with this codec. So it is an possible supported codec.

# [Supported video formats]:
# --------------------------------------------------------------------------------------------
# mpegps mpeg1 tested ok up to 1920x1080.
# =====================ok======ok==ok=
#Supported = f:mpegps v:mpeg1 a:mpa|mp3 m:video/mpeg
# =====================ok======ok==ok==ok==ok==
#Supported = f:mpegps v:mpeg2 a:mpa|mp3|ac3|lpcm m:video/mpeg
# --------------------------------------------------------------------------------------------
# mpegts with h264 is not supported.
# Multiple audio channels are supported.
# Both mime types work for mpegts: video/mpeg , video/vnd.dlna.mpeg-tts
# =====================ok======ok==ok==ok==
#Supported = f:mpegts v:mpeg2 a:mpa|ac3|lpcm m:video/vnd.dlna.mpeg-tts
# --------------------------------------------------------------------------------------------
# No limit to the resolution with avi and divx.
# avc (h264) video doesn't work with avi and divx.
# lpcm and wma audio aren't working.
#
# avi with qpel and gmc test:
# 40pfl8605h_12 not ok qpel yes gmc 2  avi divx (divx 5)
# 40pfl8605h_12     ok qpel no  gmc 2  avi divx (divx 5)
# 40pfl8605h_12     ok qpel yes gmc no avi mp4  (xvid asp l5)
# 40pfl8605h_12     ok qpel no  gmc 3  avi mp4  (xvid asp l5)
# 40pfl8605h_12     ok qpel yes gmc 3  avi mp4  (xvid asp l5)
# qpel is not supported with avi divx.
#
# Mime types working with avi and divx:
# video/avi , video/x-ms-avi , video/msvideo , video/x-msvideo
# ==================ok====ok==ok==ok=
#Supported = f:avi v:mp4 a:ac3|mp3|mpa m:video/x-msvideo
# =========================ok==ok==?==
#Supported = f:avi v:divx a:ac3|mp3|mpa m:video/x-msvideo qpel:no
#
# My test files with the divx format have no gmc or qpel yes:
# ===================ok=====ok==ok==?============== qpel?
#Supported = f:divx v:divx a:ac3|mp3|mpa m:video/x-msvideo
# --------------------------------------------------------------------------------------------
# b: seems to could be used as max video bitrate. Not confirmed in PS3.conf
# mp4 with h264 max bitrate ok tested file have 4403 Kbps = 4508672 bps
# b:4528690 needed to skip transcode with this test file.
# This adding fixes most of the baseline@L4.1 and high@L4.1 problems.
#
# mp4 with lpcm audio is not supported.
# Both mime types work for mp4: video/mp4 , video/h264
# ==================ok=====ok==ok==ok==?==
#Supported = f:mp4 v:h264 a:aac|ac3|mp3|mpa b:4528690 m:video/h264
#
# (according Phillips specs. 720x576i max and 8Mbps max voor mp4.)
# But tested ok up to 1920x1080.
# ==================ok====ok==ok==ok==?==
#Supported = f:mp4 v:mp4 a:aac|ac3|mp3|mpa m:video/h264
# --------------------------------------------------------------------------------------------
# mov with h264 can play native, but the bitrate of most files is to high to play flawless.
# mov with mp4 video is not supported.
# mov with mp3 audio is not supported.
# mov with lpcm audio is not supported.
# Both mime types work for mov: video/mp4 , video/h264
# ==================ok=====ok==?===?==
# Supported = f:mov v:h264 a:aac|ac3|mpa m:video/h264
# --------------------------------------------------------------------------------------------
# wmv1 and wmv2 aren't supported.
# wmv with mpeg2 video is not supported.
# wmv with mp4 video is not supported.
# wmv with lpcm audio is not supported.
# Next mime types works for wmv vc1 and wmv3:
# video/x-ms-asf , video/x-ms-asf-plugin and video/x-ms-wmv
# ==================ok====ok=
#Supported = f:wmv v:vc1 a:wma n:2 s:48000 m:video/x-ms-wmv
# --------------------------------------------------------------------------------------------
# mkv with mp4, vc1, mpeg2 and dv video are not supported.
# lpcm audio doesn't work native with my test mkv files.
# ==================ok=====ok==ok==ok==ok=
#Supported = f:mkv v:h264 a:aac|ac3|mp3|mpa m:video/x-matroska

# [Supported audio formats]:
# --------------------------------------------------------------------------------------------
# ============ok==ok=
#Supported = f:mpa|mp3 n:2 s:48000 b:327680 m:audio/mpeg
# ==================ok=
#Supported = f:wma a:wma n:2 s:48000 b:348160 m:audio/x-ms-wma
# ==================ok=
#Supported = f:mp4 a:aac n:6 s:48000 b:327680 m:audio/mp4
# --------------------------------------------------------------------------------------------
# mp3 is not supported with wav audio.
# ============ok===ok====ok==
#Supported = f:aiff|wav a:lpcm n:1 s:44100 b:1445069 m:audio/L16;rate=44100;channels=1
#Supported = f:aiff|wav a:lpcm n:2 s:44100 b:1445069 m:audio/L16;rate=44100;channels=2
#Supported = f:aiff|wav a:lpcm n:1 s:48000 b:1445069 m:audio/L16;rate=48000;channels=1
#Supported = f:aiff|wav a:lpcm n:2 s:48000 b:1445069 m:audio/L16;rate=48000;channels=2
# --------------------------------------------------------------------------------------------
# mpeg-4 audio files with m4a codec id and .m4a file extension don't
# sound correctly (Suddenly speed up and then plays again).
# Files with a constant bitrate have the same problem.
# Same error occurs when files are directly played on 40pfl8605h_12 from an usb stick.
# Supported = f:aac a:aac n:6 s:48000 b:327680 m:audio/mp4
# --------------------------------------------------------------------------------------------
# My Test adts audio files are badly parsed. No tested line.
# Supported = f:adts a:aac s:48000 m:audio/vnd.dlna.adts

# [Supported image formats]:
# --------------------------------------------------------------------------------------------
# An preview thumbnail of jpeg are generated on the right of the browser.
#Supported = f:jpg m:image/jpeg
# --------------------------------------------------------------------------------------------
# tiff is not supported. This line is added so that the 40pfl8605h_12 recognizes tiff
# as an unsupported format.
#Supported = f:tiff m:image/tiff
# -------------------------------------- end of config ---------------------------------------

pablo_hp
 
Posts: 2
Joined: Mon Jan 24, 2011 4:36 am

Re: Config file Philips TV 40pfl8605h_12

Postby taconaut » Sat Mar 31, 2012 10:54 am

Just as a follow up to this post. I got the 52PFL9606K some weeks back. I wasn't able to play back anything through wifi (pms showed up though) but after having wired it, all files I've tested played flawlessly. Because of the unsupported DTS format, it's no alternative to using the ps3.
If you always wanted to have your most recent videos at the top of the folder in the ps3 or wished you could group all videos with the same genre in one folder, have a look at pms-mlx
taconaut
Project Member
 
Posts: 1060
Joined: Sat Apr 11, 2009 12:29 am
Location: Switzerland

Re: Config file Philips TV 40pfl8605h_12

Postby YourPrivateDJ » Mon Apr 16, 2012 2:28 pm

Hi, can you make config file for 32pfl5507k/12?
It's a new model, from 2012, have a mkv support...
my problem is with mkv transcoding, my pc is not to fast.... u know what i mean.
when i skip transcoding for MKV, i dont have subtitles :( but everiting is good.

greetings from Bulgaria ;)

ps, sorry for my English
Philips 32PFL5507K/12, PlayStation 3, Motorola Xoom, Samsung Galaxy SII powered by TP-Link TL-WR1043ND+3xTL-ANT2405C & PS3 Media Server@OS X 10.6.8 (SL)
User avatar
YourPrivateDJ
 
Posts: 6
Joined: Mon Apr 16, 2012 2:09 pm

Re: Config file Philips TV 40pfl8605h_12

Postby leroy » Mon Apr 16, 2012 9:34 pm

hey YourPrivateDJ,

The specs of the 32PFL5507K/12 are the same as my 40pfl8605h_12,
So i guess the config-file is fine for the 32PFL5507K/12

Video Playback Formats:
Containers: AVI, MKV, H264/MPEG-4 AVC, MPEG-1, MPEG-2, MPEG-4, WMV9/VC1
Music Playback Formats: AAC, MP3, WMA (v2 up to v9.2)
Picture Playback Formats: JPEG

Unfortunately I guess, that also your TV doesn't support subtitles without transcoding.
leroy
 
Posts: 141
Joined: Sat Sep 24, 2011 11:55 am
Location: Netherlands

Re: Config file Philips TV 40pfl8605h_12

Postby YourPrivateDJ » Tue Apr 17, 2012 12:11 pm

It's support, but not in my encoding... I see only strange characters :) I try it with mkv from flash drive, it's play well, but subtitles is in wrong encoding. :(
all I want is, to play mkv's with sub. but without transcoding, is that possible?
Philips 32PFL5507K/12, PlayStation 3, Motorola Xoom, Samsung Galaxy SII powered by TP-Link TL-WR1043ND+3xTL-ANT2405C & PS3 Media Server@OS X 10.6.8 (SL)
User avatar
YourPrivateDJ
 
Posts: 6
Joined: Mon Apr 16, 2012 2:09 pm

Re: Config file Philips TV 40pfl8605h_12

Postby leroy » Tue Apr 17, 2012 11:53 pm

hey YourPrivateDJ,

I found the 32PFL5507K/12 manual.
It provide a codec table for the supported audio, video and subtitle formats.
http://download.p4c.philips.com/files/3/32pfl5507k_12/32pfl5507k_12_dfu_eng.pdf

Only .avi and .divx with xsub and xsub+ subtitles are supported with dlna.
External subtitles like .srt .sup .smi .sami are only supported trough USB.
Unfortunately MKV subtitles are not supported.

The codec support for the xxPFLxxx7 ( 2012) TV is not the same as the xxPFLxxx5 ( 2010) TV.
For example MKV with MPEG-4 ASP is also supported.

I have made a new config file for this TV with modified supported lines for more native support.
I can not test it because I have not this TV but you can give it a try.
Replace the PhilipsPFL.conf with this one.
PhilipsPFLxxx7 1.0.conf.zip
(1.81 KiB) Downloaded 1179 times
leroy
 
Posts: 141
Joined: Sat Sep 24, 2011 11:55 am
Location: Netherlands

Re: Config file Philips TV 40pfl8605h_12

Postby YourPrivateDJ » Fri Apr 20, 2012 6:21 pm

lol, u make my day :)
It's a hell of a good job! thanks, its work very well.
mkv's that previously did not play it well, now its play it without problems.
Philips 32PFL5507K/12, PlayStation 3, Motorola Xoom, Samsung Galaxy SII powered by TP-Link TL-WR1043ND+3xTL-ANT2405C & PS3 Media Server@OS X 10.6.8 (SL)
User avatar
YourPrivateDJ
 
Posts: 6
Joined: Mon Apr 16, 2012 2:09 pm

Re: Config file Philips TV 40pfl8605h_12

Postby leroy » Sat Apr 28, 2012 9:37 pm

hey YourPrivateDJ,
Cool! Thanks for the feedback.
Unfortunately also with a 2012 model, a decent processor is needed for transcoding DTS audio and,
MKV with embedded or external subtitles, because the absence of native support.
leroy
 
Posts: 141
Joined: Sat Sep 24, 2011 11:55 am
Location: Netherlands

Re: Config file Philips TV 40pfl8605h_12

Postby YourPrivateDJ » Sun Apr 29, 2012 6:58 pm

I've made new icon for 5507, fell free to use it.
Also and one new for ps3, that I like more.

Screen shot 2012-04-29 at 20.48.32.png
Screen shot 2012-04-29 at 20.48.32.png (89.09 KiB) Viewed 2865 times


philips-pfl.png
philips-pfl.png (54.1 KiB) Viewed 2865 times


ps3.png
ps3.png (14.45 KiB) Viewed 2865 times
Philips 32PFL5507K/12, PlayStation 3, Motorola Xoom, Samsung Galaxy SII powered by TP-Link TL-WR1043ND+3xTL-ANT2405C & PS3 Media Server@OS X 10.6.8 (SL)
User avatar
YourPrivateDJ
 
Posts: 6
Joined: Mon Apr 16, 2012 2:09 pm

Re: Config file Philips TV 40pfl8605h_12

Postby Raptor399 » Thu May 03, 2012 6:53 am

Alas, the renderer recognition of the PhilipsPFLxxx7.conf overlaps with the PhilipsPFL.conf.
Both use:

Code: Select all
# Renderer recognition:
# --------------------------------------------------------------------------------------------
UserAgentSearch = PhilipsIntelSDK
# No additional userAgent known.
UserAgentAdditionalHeader =
UserAgentAdditionalHeaderSearch =

This means we can't include the new configuration in PMS.

Is there a way to distinguish the two models?
Raptor399
Project Member
 
Posts: 1916
Joined: Thu Mar 10, 2011 12:06 am

PreviousNext

Return to Alternative Media Renderers

Who is online

Users browsing this forum: No registered users and 3 guests