Channel plugin (Updated 12-06-23)

[SharkHunter]

I have a simple question... Where do I put Rapidshare username and password for icefilms?

In the PMS.cred file.

Hey,
Anyone able to get this to work? I'm on [Mac OS] 10.6 and get the no input stream. Here is my config file. I have to believe that is where the issue lies, but I'm not a programmer. I'm wiling to work with anyone with more knowledge than me to work this out and write a good tutorial once I can get it going. I can stream music and internet radio without any issues.

How does your logs look like? zip and upload.

[pezur]

Same problem here, but only in some channels like TV3play. When i start an episode i get the message "corrupt data" (there is no input stream) a few times, usually the third try the episode starts playing but after 2-3 minutes it will suddenly stop returning error code 2 in rtmpdump. Im also on mac osx 10.6. Could be a buffer problem?

[SharkHunter]

Same problem here, but only in some channels like TV3play. When i start an episode i get the message "corrupt data" (there is no input stream) a few times, usually the third try the episode starts playing but after 2-3 minutes it will suddenly stop returning error code 2 in rtmpdump. Im also on mac osx 10.6. Could be a buffer problem?

Could be. Upload the logs.

[DubbelX]

The new file (Feb 25, 2012) of UitzendingGemist.

73's

[SharkHunter]

Hi,

New version (1.59) out there. This one adds some new props (unescape/escape) that might be good to have. Then I looked on SVTPLay and found out that they have subs on almost all there shows just waiting to be downloaded. This must of course be used so now channels can download subs that are embeded with the streams (thus they are called embeded subs). Just add a "subs" to the matcher order.

/SharkHunter

[Larkin]

Hi, thanks for the great tool.

I'm new to all of this and tried to read as much before posting and asking for help.

I want to use the ZDF channel but failed. I'm using the latest sharkhunter pms build with ZDF.ch and a bravia 5500 renderer on windows 7 64bit.

I can browse to a certain film but when selecting it, I get "access to server not possible. check your server settings" after some seconds. I translated this message from german.

Any hint for me ? Channel ARD with ARD.ch is working fine.

[pezur]

Same problem here, but only in some channels like TV3play. When i start an episode i get the message "corrupt data" (there is no input stream) a few times, usually the third try the episode starts playing but after 2-3 minutes it will suddenly stop returning error code 2 in rtmpdump. Im also on mac osx 10.6. Could be a buffer problem?

Could be. Upload the logs.

Here is what happens, about 4 minutes after i get the error code2 the episode pauses and cannot be resumed:,

Code: Select all

[New I/O server worker #1-4] INFO  12:13:55.874 Starting transcode/remux of Lyxfällan S12E04
[mkfifo] DEBUG 12:13:55.884 Starting mkfifo -m 777 /var/folders/lP/lPmbdANPEv8x03wv+GjCuk+++TI/-Tmp-/ps3mediaserver/pmsencoder_transcoder_out_1330859635875_1040
[mkfifo] DEBUG 12:13:55.927 Unix process ID (mkfifo): 31073
[mkfifo] DEBUG 12:13:56.114 Starting mkfifo -m 777 /var/folders/lP/lPmbdANPEv8x03wv+GjCuk+++TI/-Tmp-/ps3mediaserver/pmsencoder_downloader_out_1330859635875_1040
[mkfifo] DEBUG 12:13:56.158 Unix process ID (mkfifo): 31074
[/Applications/rtmpdump] DEBUG 12:13:56.316 Starting /Applications/rtmpdump -o /private/var/folders/lP/lPmbdANPEv8x03wv+GjCuk+++TI/-Tmp-/ps3mediaserver/pmsencoder_downloader_out_1330859635875_1040 -r rtmp://cp90686.edgefcs.net/ondemand/flash/sweden/tv3/Lyxfallan/Season12/Program/lyxfallan_1204
[osx/ffmpeg] DEBUG 12:13:56.330 Starting /Applications/PS3 Media Server.app/Contents/Resources/Java/osx/ffmpeg -v 0 -y -threads 2 -i /private/var/folders/lP/lPmbdANPEv8x03wv+GjCuk+++TI/-Tmp-/ps3mediaserver/pmsencoder_downloader_out_1330859635875_1040 -threads 2 -target ntsc-dvd /private/var/folders/lP/lPmbdANPEv8x03wv+GjCuk+++TI/-Tmp-/ps3mediaserver/pmsencoder_transcoder_out_1330859635875_1040
[osx/ffmpeg] DEBUG 12:13:56.377 Reading pipe: /var/folders/lP/lPmbdANPEv8x03wv+GjCuk+++TI/-Tmp-/ps3mediaserver/pmsencoder_transcoder_out_1330859635875_1040
[osx/ffmpeg] DEBUG 12:13:57.412 Attaching thread: osx/ffmpeg
[/Applications/rtmpdump] INFO  12:14:57.876 Process /Applications/rtmpdump has a return code of 2! Maybe an error occured... check the log file
[osx/ffmpeg] DEBUG 12:14:57.906 Stopping Unix process 31073: mkfifo
[osx/ffmpeg] DEBUG 12:14:57.906 Stopping Unix process 31074: mkfifo
[osx/ffmpeg] DEBUG 12:14:57.906 Stopping process: /Applications/rtmpdump
[New I/O server worker #1-4] DEBUG 12:15:42.320 Setting margin to 2Mb
[Thread-17] DEBUG 12:15:48.759 Sending ALIVE...
[Thread-362] DEBUG 12:18:21.662 Stopping process: osx/ffmpeg
[Thread-362] DEBUG 12:18:21.663 Stopping process: /Applications/rtmpdump
[Thread-17] DEBUG 12:18:53.977 Sending ALIVE...


[SharkHunter]

I want to use the ZDF channel but failed. I'm using the latest sharkhunter pms build with ZDF.ch and a bravia 5500 renderer on windows 7 64bit.

ZDF has not been working for awhile (ARD works fine as you noticed). I think it is the mms support that there is something fishy with since non mms based streams from ZDF actually works...

Here is what happens, about 4 minutes after i get the error code2 the episode pauses and cannot be resumed:,

Code: Select all

[New I/O server worker #1-4] INFO  12:13:55.874 Starting transcode/remux of Lyxfällan S12E04
[mkfifo] DEBUG 12:13:55.884 Starting mkfifo -m 777 /var/folders/lP/lPmbdANPEv8x03wv+GjCuk+++TI/-Tmp-/ps3mediaserver/pmsencoder_transcoder_out_1330859635875_1040
[mkfifo] DEBUG 12:13:55.927 Unix process ID (mkfifo): 31073
[mkfifo] DEBUG 12:13:56.114 Starting mkfifo -m 777 /var/folders/lP/lPmbdANPEv8x03wv+GjCuk+++TI/-Tmp-/ps3mediaserver/pmsencoder_downloader_out_1330859635875_1040
[mkfifo] DEBUG 12:13:56.158 Unix process ID (mkfifo): 31074
[/Applications/rtmpdump] DEBUG 12:13:56.316 Starting /Applications/rtmpdump -o /private/var/folders/lP/lPmbdANPEv8x03wv+GjCuk+++TI/-Tmp-/ps3mediaserver/pmsencoder_downloader_out_1330859635875_1040 -r rtmp://cp90686.edgefcs.net/ondemand/flash/sweden/tv3/Lyxfallan/Season12/Program/lyxfallan_1204
[osx/ffmpeg] DEBUG 12:13:56.330 Starting /Applications/PS3 Media Server.app/Contents/Resources/Java/osx/ffmpeg -v 0 -y -threads 2 -i /private/var/folders/lP/lPmbdANPEv8x03wv+GjCuk+++TI/-Tmp-/ps3mediaserver/pmsencoder_downloader_out_1330859635875_1040 -threads 2 -target ntsc-dvd /private/var/folders/lP/lPmbdANPEv8x03wv+GjCuk+++TI/-Tmp-/ps3mediaserver/pmsencoder_transcoder_out_1330859635875_1040
[osx/ffmpeg] DEBUG 12:13:56.377 Reading pipe: /var/folders/lP/lPmbdANPEv8x03wv+GjCuk+++TI/-Tmp-/ps3mediaserver/pmsencoder_transcoder_out_1330859635875_1040
[osx/ffmpeg] DEBUG 12:13:57.412 Attaching thread: osx/ffmpeg
[/Applications/rtmpdump] INFO  12:14:57.876 Process /Applications/rtmpdump has a return code of 2! Maybe an error occured... check the log file


Can you try SVTPlay (or Kanal5 or UR or tv4). I've seen that the viasat channels some times gives up and wants you to hit "resume" (in rtmpdump so it nothing you can do from PMS right now).

[pezur]

SVtplay is the most stable channel with only 1/10 in error ratio , Kanal5 wont play at all at the moment (tried several streams)..will do some more checkup, saw you mention something about perl in another post. Heres my PMS.conf:

Code: Select all

humbnails = true
image_thumbnails = true
mencoder_ass = true
uuid = 43febb09-a43d-378d-aad9-e5741e0d33fb
maxvideobuffer = 600
engines = pmsencoder,mencoder,avsmencoder,tsmuxer,mplayeraudio,ffmpegaudio,tsmuxeraudio,vlcvideo,mencoderwebvideo,mplayervideodump,mplayerwebaudio,vlcaudio,ffmpegdvrmsremux,rawthumbs
rtmpdump.path = /Applications/rtmpdump
channels.path = /Applications/PS3 Media Server.app/Contents/Resources/Java/channels
pmsencoder.script.directory = /Applications/PS3 Media Server.app/Contents/Resources/Java/scripts
cookie.path = /Applications/PS3 Media Server.app/Contents/Resources/Java/channels/data/cookies
channels.debug = true
channels.subtitles = true
channels.group_folder = false
channels.favorite = true
get-flash-videos.path = /Applications/PS3 Media Server.app/Contents/Resources/Java/scripts
perl.path = /usr/bin/perl
youtube-dl.path = /Applications/PS3 Media Server.app/Contents/Resources/Java/scripts


[SharkHunter]

Since our on a mac you cant play kanal5 since it requires special hacks in the perl script etc. If you truely want it to happen I can give you instructions.