Compiling PS3 Media Server on OSX

[Raptor399]

Is there a patch for the ASS and VOBSUB subtitles that is broken in the newer MEncoder builds?

The patch is to use the older builds

From what I know:

- Yes, PMS contains a patch to fix the broken ASS and VOBSUB subtitles. As chocolateboy writes, the trick is to use older versions of mencoder where the support is not broken. PMS supports defining an alternate version of mencoder.

- No, although PMS supports an alternate version of mencoder, I have not been able to build one for OSX.

As a workaround you could get your hands on an older working version of mencoder and configure PMS to use that as alternate.

[Redlum]

The final piece is fribidi, it's required for PMS (subtitles in some languages won't work otherwise). I'm trying to fix it but whatever revision I use (even ones that worked before) it doesn't work anymore.

I'm back on mplayer 33342 and ffmpeg 2011-04-24 but still get fribidi issues.

[Redlum]

Small update.

- Fixed mencoder_mt
- Updated sourceforge links to not use a specific mirror (link still works if that mirror disappears)
- Included a fix for a fribidi regression in mplayer, but still broken.
- Updated revisions to latest versions, they work.

Code: Select all

#!/bin/sh
#
# build-pms-osx.sh
#
# Version: 1.8.1
# Last updated: 2011-06-13
# Author: Patrick Atoon
#
#
# DESCRIPTION
#
# Building a statically linked PS3 Media Server for OSX is not an easy
# task and requires advanced knowledge of building the libraries and
# tools involved.
#
# This script will take care of building all that is required to build
# a statically linked PS3 Media Server for OSX.
# It will attempt to build universal binaries (for Intel and PCC)  where
# possible. However, some libraries do not support this and the script
# will compile for the current architecture.
#
# The script will compile the PS3 Media Server disk image file:
#
#    pms-macosx-arch-x.xx.x.dmg
#
# This script is provided as is. If it works for you, good! If it does
# not, try to figure out why and share your findings on the PS3 Media
# Server forums (http://www.ps3mediaserver.org/forum/)
#
#
# REQUIREMENTS
#
# Some Developer tools need to be installed manually. The script detects
# this and provides help. Other sources will be downloaded automatically.
#
#
# ACKNOWLEDGEMENTS
#
# Many thanks to the PS3 Media Server developers and forum moderators
# for keeping the project alive and the info coming. Special thanks to
# Adrian Stutz for sharing his findings of how to build a statically
# linked MPlayerOSX (http://www.mplayerosx.ch/), without his hard work
# this script would not have been possible. Also thanks to Redlum for
# his assistance in getting this script production ready.
#
#
# TODO
#
# - Clean up dependencies that are not needed for PMS
#
#
# COPYRIGHT
#
# This script is distributed under the Creative Commons Attribution 3.0
# (CC BY) license. This means you are free to copy, distribute, transmit
# and adapt it to suit your needs, as long as you mention the original
# author in your work.
# For more details, see http://creativecommons.org/licenses/by/3.0/
#
#
# CONFIGURATION
#
# Set FIXED_REVISIONS to "no" to check out the latest revisions.
# Default is "yes" to check out the last known working revision.
FIXED_REVISIONS="yes"

# Set TARGET_ARCHITECTURE for building binaries. Choose one of the following:
#
#    native: build for your own computer
#    x86_64: build for 64 bits Intel x86
#    i386: build for Intel 386
#    ppc: build for PowerPC
#
TARGET_ARCHITECTURE="i386"

# Set the amount of threads that are used for compiling everything. This
# should generally be the same as the amount of CPU cores in your computer
# (look for Total Number Of Cores in System Profiler if you don't know it).
THREADS="2"

# It should not be necessary to change anything below this line
##########################################

# Binaries
ANT=/usr/bin/ant
CURL=/usr/bin/curl
GCC=/usr/bin/gcc
GIT=/usr/local/git/bin/git
HDID=/usr/bin/hdid
HDIUTIL=/usr/bin/hdiutil
MAKE=/usr/bin/make
SED=/usr/bin/sed
SVN=/usr/bin/svn
TAR=/usr/bin/tar
YASM=/usr/local/bin/yasm
UNZIP=/usr/bin/unzip

##########################################
# Create a directory when it does not exist
#
createdir() {
    if [ ! -d $1 ]; then
        mkdir $1
    fi
}


##########################################
# Set the compiler flags to determine the architecture to compile for
# Optional parameter: architecture flags string to replace the default,
# e.g. "-arch ppc -faltivec -mcpu=7450"
#
set_flags() {
    # Minimum OS version as target
    export MACOSX_DEPLOYMENT_TARGET=10.5
    export CFLAGS="-mmacosx-version-min=10.5 -isystem /Developer/SDKs/MacOSX10.5.sdk"
    export LDFLAGS="-mmacosx-version-min=10.5 -isysroot /Developer/SDKs/MacOSX10.5.sdk -Wl,-syslibroot,/Developer/SDKs/MacOSX10.5.sdk"
    export CXXFLAGS="-mmacosx-version-min=10.5 -isysroot /Developer/SDKs/MacOSX10.5.sdk"

    if [ "$1" != "" ]; then
        # Use the supplied parameter string for architecture flags
        export CFLAGS="$CFLAGS $1"
        export LDFLAGS="$LDFLAGS $1"
        export CXXFLAGS="$CXXFLAGS $1"
    else
        # Uncomment for single architecture binary
        export CFLAGS="$CFLAGS -arch $ARCHITECTURE"
        export LDFLAGS="$LDFLAGS -arch $ARCHITECTURE"
        export CXXFLAGS="$CXXFLAGS -arch $ARCHITECTURE"
    fi

    # Paths of the build environment
    export LDFLAGS="$LDFLAGS -L$TARGET/lib -Wl,-search_paths_first"
    export CFLAGS="$CFLAGS -I$TARGET/include"
    export CXXFLAGS="$CXXFLAGS -I$TARGET/include"
}


##########################################
# Initialize building environment
#
initialize() {
    WORKDIR=`pwd`

    # Directories for statically compiled libraries
    TARGET="$WORKDIR/target"
    SRC="$WORKDIR/src"
    createdir "$SRC"
    createdir "$TARGET"

    if [ "$TARGET_ARCHITECTURE" == "native" ]; then
        ARCHITECTURE=`/usr/bin/uname -p`
    else
        ARCHITECTURE=$TARGET_ARCHITECTURE
    fi

    # Set default compiler flags
    set_flags

    # Reset paths for compiling
    export PATH="$TARGET/bin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/X11/bin"
    export PKG_CONFIG_PATH=""
}


##########################################
# Check for gcc, make, svn, ant and curl
#
check_xcode() {
    if [ ! -x $GCC -o ! -x $SVN -o ! -x $ANT -o ! -x $CURL -o ! -x $MAKE ]; then
        cat << EOM
It seems you are missing Xcode from Apple, which is required to run this script.

Please go to http://developer.apple.com/technologies/xcode.html, create a free
Apple developer account and download Xcode and install it.
EOM
        exit;
    fi
}


##########################################
# Check for yasm
#
check_yasm() {
    if [ ! -x $YASM ]; then
        cat << EOM
It seems you are missing "yasm", which is required to run this script.
Please run the following commands to install "yasm":

    $SVN checkout http://www.tortall.net/svn/yasm/trunk/yasm yasm
    cd yasm
    ./autogen.sh
    ./configure
    make
    sudo make install
    cd $WORKDIR

EOM
        exit;
    fi
}


##########################################
# Check for git
#
check_git() {
    if [ ! -x $GIT ]; then
        cat << EOM
It seems you are missing "git", which is required to run this script.
Please go to http://code.google.com/p/git-osx-installer/, download git
and install it.
EOM
        exit;
    fi
}


##########################################
# Check for jarbundler
#
check_jarbundler() {
    # See if the jar file exists
    ls /usr/share/ant/lib/jarbundler-*.jar > /dev/null 2>&1

    if [ "$?" == "1" ]; then
        cat << EOM
It seems you are missing "jarbundler", which is required to run this script.
Please go to http://www.informagen.com/JarBundler/ , download the jarbundler
and install it.
EOM
        exit;
    fi
}


##########################################
# Exit if the previous command ended with an error status
#
exit_on_error() {
    if [ "$?" != "0" ]; then
        echo Fatal error occurred, aborting build.
        cd $WORKDIR
        exit
    fi
}


##########################################
# Building start marker to more easily follow the build process
#
start_build() {
    cat << EOM


--------------------------------------------------------------------------------------
Building $1
--------------------------------------------------------------------------------------

EOM
}



##########################################
# DCRAW
# http://www.cybercom.net/~dcoffin/dcraw/
#
build_dcraw() {
    start_build dcraw
    cd $SRC

    if [ ! -d dcraw-9.07 ]; then
        $CURL -L http://www.cybercom.net/~dcoffin/dcraw/archive/dcraw-9.07.tar.gz > dcraw-9.07.tar.gz
        exit_on_error
        $TAR xzf dcraw-9.07.tar.gz -s /dcraw/dcraw-9.07/
    fi

    cd dcraw-9.07
    set_flags
    $GCC -O4 -o dcraw dcraw.c -lm -ljpeg -DNO_LCMS $CFLAGS -L$TARGET/lib
    exit_on_error
    createdir $TARGET/bin
    cp dcraw $TARGET/bin
    cd $WORKDIR
}


##########################################
# EXPAT
# http://expat.sourceforge.net/
#
build_expat() {
    start_build expat
    cd $SRC

    if [ ! -d expat-2.0.1 ]; then
        $CURL -L http://downloads.sourceforge.net/project/expat/expat/2.0.1/expat-2.0.1.tar.gz > expat-2.0.1.tar.gz
        exit_on_error
        $TAR xzf expat-2.0.1.tar.gz
    fi

    cd expat-2.0.1
    set_flags
    ./configure --disable-shared --disable-dependency-tracking --prefix=$TARGET
    $MAKE -j$THREADS
    exit_on_error
    $MAKE install
    cd $WORKDIR
}


##########################################
# FAAD2
# http://www.audiocoding.com/faad2.html
#
build_faad2() {
    start_build faad2
    cd $SRC

    if [ ! -d faad2-2.7 ]; then
        $CURL -L http://downloads.sourceforge.net/project/faac/faad2-src/faad2-2.7/faad2-2.7.tar.gz > faad2-2.7.tar.gz
        exit_on_error
        $TAR xzf faad2-2.7.tar.gz
    fi

    cd faad2-2.7
    set_flags
    ./configure --disable-shared --disable-dependency-tracking --prefix=$TARGET
    $MAKE -j$THREADS
    exit_on_error
    $MAKE install
    cd $WORKDIR
}


##########################################
# FLAC
# http://flac.sourceforge.net/
#
build_flac() {
    start_build flac
    cd $SRC

    if [ ! -d flac-1.2.1 ]; then
        $CURL -L http://downloads.xiph.org/releases/flac/flac-1.2.1.tar.gz > flac-1.2.1.tar.gz
        exit_on_error
        $TAR xzf flac-1.2.1.tar.gz
    fi

    cd flac-1.2.1
    set_flags

    if [ "$ARCHITECTURE" == "x86_64" ]; then
        ./configure --disable-shared --disable-dependency-tracking --host=x86-apple-darwin10 --prefix=$TARGET
    else
        ./configure --disable-shared --disable-dependency-tracking --disable-asm-optimizations --prefix=$TARGET
    fi

    $MAKE -j$THREADS
    exit_on_error
    $MAKE install
    cd $WORKDIR
}


##########################################
# FONTCONFIG
# http://fontconfig.org/wiki/
#
build_fontconfig() {
    start_build fontconfig
    cd $SRC

    if [ ! -d fontconfig-2.8.0 ]; then
        $CURL -L http://www.freedesktop.org/software/fontconfig/release/fontconfig-2.8.0.tar.gz > fontconfig-2.8.0.tar.gz
        exit_on_error
        $TAR xzf fontconfig-2.8.0.tar.gz
    fi

    cd fontconfig-2.8.0
    set_flags
    ./configure --disable-shared --disable-dependency-tracking --prefix=$TARGET
    $MAKE -j$THREADS
    exit_on_error
    $MAKE install
    cd $WORKDIR
}


##########################################
# FREETYPE
# http://www.freetype.org/
#
build_freetype() {
    start_build freetype
    cd $SRC

    if [ ! -d freetype-2.4.4 ]; then
        $CURL -L http://download.savannah.gnu.org/releases/freetype/freetype-2.4.4.tar.gz > freetype-2.4.4.tar.gz
        exit_on_error
        $TAR xzf freetype-2.4.4.tar.gz
    fi

    cd freetype-2.4.4
    set_flags
    ./configure --disable-shared --disable-dependency-tracking --prefix=$TARGET
    $MAKE -j$THREADS
    exit_on_error
    $MAKE install
    cd $WORKDIR
}


##########################################
# FRIBIDI
# http://fribidi.org/
#
build_fribidi() {
    start_build fribidi
    cd $SRC

    if [ ! -d fribidi-0.19.2 ]; then
        $CURL -L http://fribidi.org/download/fribidi-0.19.2.tar.gz > fribidi-0.19.2.tar.gz
        exit_on_error
        $TAR xzf fribidi-0.19.2.tar.gz
    fi

    cd fribidi-0.19.2
    set_flags
    ./configure --disable-shared --disable-dependency-tracking --prefix=$TARGET
    $MAKE -j$THREADS
    exit_on_error
    $MAKE install
    cd $WORKDIR
}


##########################################
# GIFLIB
# http://sourceforge.net/projects/giflib/
#
build_giflib() {
    start_build giflib
    cd $SRC

    if [ ! -d giflib-4.1.6 ]; then
        $CURL -L http://downloads.sourceforge.net/project/giflib/giflib%204.x/giflib-4.1.6/giflib-4.1.6.tar.bz2 > giflib-4.1.6.tar.bz2
        exit_on_error
        $TAR xjf giflib-4.1.6.tar.bz2
    fi

    cd giflib-4.1.6
    set_flags
    ./configure --disable-shared --disable-dependency-tracking --prefix=$TARGET
    $MAKE -j$THREADS
    exit_on_error
    $MAKE install
    cd $WORKDIR
}


##########################################
# ICONV
# http://www.gnu.org/software/libiconv/
#
build_iconv() {
    start_build iconv
    cd $SRC

    if [ ! -d libiconv-1.13.1 ]; then
        $CURL -L http://ftp.gnu.org/pub/gnu/libiconv/libiconv-1.13.1.tar.gz > libiconv-1.13.1.tar.gz
        exit_on_error
        $TAR xzf libiconv-1.13.1.tar.gz
    fi

    cd libiconv-1.13.1
    set_flags
    ./configure --disable-shared --disable-dependency-tracking --prefix=$TARGET
    $MAKE -j$THREADS
    exit_on_error
    $MAKE install
    cd $WORKDIR
}


##########################################
# JPEG
# http://www.ijg.org/
#
build_jpeg() {
    start_build jpeg
    cd $SRC

    if [ ! -d jpeg-8c ]; then
        $CURL -L http://www.ijg.org/files/jpegsrc.v8c.tar.gz > jpegsrc.v8c.tar.gz
        exit_on_error
        $TAR xzf jpegsrc.v8c.tar.gz
    fi

    cd jpeg-8c
    set_flags
    ./configure --disable-shared --disable-dependency-tracking --prefix=$TARGET
    $MAKE -j$THREADS
    exit_on_error
    $MAKE install
    cd $WORKDIR
}


##########################################
# LAME
# http://lame.sourceforge.net/
#
build_lame() {
    start_build lame
    cd $SRC

    if [ ! -d lame-3.98.4 ]; then
        $CURL -L http://downloads.sourceforge.net/project/lame/lame/3.98.4/lame-3.98.4.tar.gz > lame-3.98.4.tar.gz
        exit_on_error
        $TAR xzf lame-3.98.4.tar.gz
    fi

    cd lame-3.98.4
    set_flags
    ./configure --disable-shared --disable-dependency-tracking --prefix=$TARGET
    $MAKE -j$THREADS
    exit_on_error
    $MAKE install
    cd $WORKDIR
}


##########################################
# LIBDCA
# http://www.videolan.org/developers/libdca.html
#
build_libdca() {
    start_build libdca
    cd $SRC

    if [ ! -d libdca-0.0.5 ]; then
        $CURL -L http://download.videolan.org/pub/videolan/libdca/0.0.5/libdca-0.0.5.tar.bz2 > libdca-0.0.5.tar.bz2
        exit_on_error
        $TAR xjf libdca-0.0.5.tar.bz2
    fi

    cd libdca-0.0.5
    set_flags
    ./configure --disable-shared --disable-dependency-tracking --prefix=$TARGET
    $MAKE -j$THREADS
    exit_on_error
    $MAKE install
    cd $WORKDIR
}


##########################################
# LIBDV
# http://libdv.sourceforge.net/
#
build_libdv() {
    start_build libdv
    cd $SRC

    if [ ! -d libdv-1.0.0 ]; then
        $CURL -L http://downloads.sourceforge.net/project/libdv/libdv/1.0.0/libdv-1.0.0.tar.gz > libdv-1.0.0.tar.gz
        exit_on_error
        $TAR xzf libdv-1.0.0.tar.gz
    fi

    cd libdv-1.0.0
    set_flags
    export LDFLAGS="$LDFLAGS -flat_namespace -undefined suppress"
    ./configure --disable-shared --disable-dependency-tracking --disable-xv \
        --disable-gtk --disable-sdl --disable-asm --prefix=$TARGET
    $MAKE -j$THREADS
    exit_on_error
    $MAKE install
    cd $WORKDIR
}


##########################################
# LIBDVDCSS
# http://www.videolan.org/developers/libdvdcss.html
#
build_libdvdcss() {
    start_build libdvdcss
    cd $SRC

    if [ ! -d libdvdcss-1.2.9 ]; then
        $CURL -L http://download.videolan.org/pub/libdvdcss/1.2.9/libdvdcss-1.2.9.tar.gz > libdvdcss-1.2.9.tar.gz
        exit_on_error
        $TAR xzf libdvdcss-1.2.9.tar.gz
    fi

    cd libdvdcss-1.2.9
    set_flags
    ./configure --disable-shared --disable-dependency-tracking --prefix=$TARGET
    $MAKE -j$THREADS
    exit_on_error
    $MAKE install
    cd $WORKDIR
}


##########################################
# LIBDVDNAV
# svn://svn.mplayerhq.hu/dvdnav/trunk/libdvdnav/
#
build_libdvdnav() {
    start_build libdvdnav
    cd $SRC

    if [ "$FIXED_REVISIONS" == "yes" ]; then
        REVISION="-r 1226"
    else
        REVISION=""
    fi

    if [ ! -d libdvdnav ]; then
        $SVN checkout $REVISION svn://svn.mplayerhq.hu/dvdnav/trunk/libdvdnav/ libdvdnav
        exit_on_error
        cd libdvdnav
    else
        cd libdvdnav
        $SVN update $REVISION
        exit_on_error
    fi

    set_flags
    ./autogen.sh --with-dvdread-config=$TARGET/bin/dvdread-config --disable-shared --disable-dependency-tracking --prefix=$TARGET
    $MAKE -j$THREADS
    exit_on_error
    $MAKE install
    cd $WORKDIR
}

##########################################
# LIBDVDREAD
# svn://svn.mplayerhq.hu/dvdnav/trunk/libdvdread/
#
build_libdvdread() {
    start_build libdvdread
    cd $SRC

    if [ "$FIXED_REVISIONS" == "yes" ]; then
        REVISION="-r 1226"
    else
        REVISION=""
    fi

    if [ ! -d libdvdread ]; then
        $SVN checkout $REVISION svn://svn.mplayerhq.hu/dvdnav/trunk/libdvdread/ libdvdread
        exit_on_error
        cd libdvdread
    else
        cd libdvdread
        $SVN update $REVISION
        exit_on_error
    fi

    set_flags
    ./autogen.sh --disable-shared --disable-dependency-tracking --prefix=$TARGET
    $MAKE -j$THREADS
    exit_on_error
    $MAKE install
    cd $WORKDIR
}


##########################################
# LIBMAD
# http://www.underbit.com/products/mad/
#
build_libmad() {
    start_build libmad
    cd $SRC

    if [ ! -d libmad-0.15.1b ]; then
        $CURL -L ftp://ftp.mars.org/pub/mpeg/libmad-0.15.1b.tar.gz > libmad-0.15.1b.tar.gz
        exit_on_error
        $TAR xzf libmad-0.15.1b.tar.gz
    fi

    cd libmad-0.15.1b
    set_flags
    ./configure --disable-shared --disable-dependency-tracking --prefix=$TARGET
    $MAKE -j$THREADS
    exit_on_error
    $MAKE install
    cd $WORKDIR
}


##########################################
# LIBMEDIAINFO
# http://sourceforge.net/projects/mediainfo/
#
build_libmediainfo() {
    start_build libmediainfo
    cd $SRC

    if [ ! -d libmediainfo_0.7.44 ]; then
        $CURL -L http://downloads.sourceforge.net/project/mediainfo/source/libmediainfo/0.7.44/libmediainfo_0.7.44.tar.bz2 > libmediainfo_0.7.44.tar.bz2
        exit_on_error
        $TAR xjf libmediainfo_0.7.44.tar.bz2 -s /MediaInfoLib/libmediainfo_0.7.44/
    fi

    cd libmediainfo_0.7.44
    cd Project/GNU/Library
    export CFLAGS=
    export LDFLAGS=
    export CXXFLAGS=

    # Note: libmediainfo requires libzen source to compile
    ./autogen
    ./configure --enable-arch-i386 --disable-shared --disable-dependency-tracking --prefix=$TARGET
    $MAKE -j$THREADS
    exit_on_error
    $MAKE install
    cd $WORKDIR
}


##########################################
# LIBPNG
# http://www.libpng.org/pub/png/libpng.html
#
build_libpng() {
    start_build libpng
    cd $SRC

    if [ ! -d libpng-1.5.2 ]; then
        $CURL -L http://downloads.sourceforge.net/project/libpng/libpng15/1.5.2/libpng-1.5.2.tar.gz > libpng-1.5.2.tar.gz
        exit_on_error
        $TAR xzf libpng-1.5.2.tar.gz
    fi

    cd libpng-1.5.2
    set_flags
    ./configure --disable-shared --disable-dependency-tracking --prefix=$TARGET
    $MAKE -j$THREADS
    exit_on_error
    $MAKE install
    cd $WORKDIR
}


##########################################
# LIBOGG
# http://xiph.org/downloads/
#
build_libogg() {
    start_build libogg
    cd $SRC

    if [ ! -d libogg-1.2.2 ]; then
        $CURL -L http://downloads.xiph.org/releases/ogg/libogg-1.2.2.tar.gz > libogg-1.2.2.tar.gz
        exit_on_error
        $TAR xzf libogg-1.2.2.tar.gz
    fi

    cd libogg-1.2.2
    set_flags
    ./configure --disable-shared --disable-dependency-tracking --prefix=$TARGET
    $MAKE -j$THREADS
    exit_on_error
    $MAKE install
    cd $WORKDIR
}


##########################################
# LIBVORBIS
# http://xiph.org/downloads/
#
build_libvorbis() {
    start_build libvorbis
    cd $SRC

    if [ ! -d libvorbis-1.3.2 ]; then
        $CURL -L http://downloads.xiph.org/releases/vorbis/libvorbis-1.3.2.tar.gz > libvorbis-1.3.2.tar.gz
        exit_on_error
        $TAR xzf libvorbis-1.3.2.tar.gz
    fi

    cd libvorbis-1.3.2
    set_flags
    ./configure --disable-shared --disable-dependency-tracking --with-ogg=$TARGET --prefix=$TARGET
    $MAKE -j$THREADS
    exit_on_error
    $MAKE install
    cd $WORKDIR
}


##########################################
# LIBTHEORA
# http://xiph.org/downloads/
#
build_libtheora() {
    start_build libtheora
    cd $SRC

    if [ ! -d libtheora-1.1.1 ]; then
        $CURL -L http://downloads.xiph.org/releases/theora/libtheora-1.1.1.tar.bz2 > libtheora-1.1.1.tar.bz2
        exit_on_error
        $TAR xjf libtheora-1.1.1.tar.bz2
    fi

    cd libtheora-1.1.1
    set_flags
    ./configure --disable-shared --disable-dependency-tracking --with-ogg=$TARGET \
        --with-vorbis=$TARGET --prefix=$TARGET
    $MAKE -j$THREADS
    exit_on_error
    $MAKE install
    cd $WORKDIR
}


##########################################
# LIBZEN
# http://sourceforge.net/projects/zenlib/
#
build_libzen() {
    start_build libzen
    cd $SRC

    if [ ! -d libzen_0.4.19 ]; then
        $CURL -L http://downloads.sourceforge.net/project/zenlib/ZenLib%20-%20Sources/0.4.19/libzen_0.4.19.tar.bz2 > libzen_0.4.19.tar.bz2
        exit_on_error
        $TAR xjf libzen_0.4.19.tar.bz2 -s /ZenLib/libzen_0.4.19/

        # libmediainfo needs this
        ln -s libzen_0.4.19 ZenLib
    fi

    cd libzen_0.4.19
    cd Project/GNU/Library
    export CFLAGS=
    export LDFLAGS=
    export CXXFLAGS=
    ./autogen
    ./configure --enable-arch-i386 --disable-shared --disable-dependency-tracking --prefix=$TARGET
    $MAKE -j$THREADS
    exit_on_error
    $MAKE install
    cd $WORKDIR
}


##########################################
# LZO2
# http://www.oberhumer.com/opensource/lzo/
#
build_lzo2() {
    start_build lzo2
    cd $SRC

    if [ ! -d lzo-2.04 ]; then
        $CURL -L http://www.oberhumer.com/opensource/lzo/download/lzo-2.04.tar.gz > lzo-2.04.tar.gz
        exit_on_error
        $TAR xzf lzo-2.04.tar.gz
    fi

    cd lzo-2.04
    set_flags

    if [ "$ARCHITECTURE" == "i386" ] || [ "$ARCHITECTURE" == "x86_64" ] ; then
        ./configure --disable-shared --disable-dependency-tracking --prefix=$TARGET
    else
        ./configure --disable-shared --disable-dependency-tracking --disable-asm --prefix=$TARGET
    fi

    $MAKE -j$THREADS
    exit_on_error
    $MAKE install
    cd $WORKDIR
}


##########################################
# NCURSES
# http://www.gnu.org/software/ncurses/
#
build_ncurses() {
    start_build ncurses
    cd $SRC

    if [ ! -d ncurses-5.9 ]; then
        $CURL -L http://ftp.gnu.org/pub/gnu/ncurses/ncurses-5.9.tar.gz > ncurses-5.9.tar.gz
        exit_on_error
        $TAR xzf ncurses-5.9.tar.gz
    fi

    cd ncurses-5.9
    set_flags
    ./configure --without-shared --disable-shared --disable-dependency-tracking --prefix=$TARGET
    $MAKE libs
    exit_on_error
    $MAKE install.libs
    cd $WORKDIR
}


##########################################
# TSMUXER
# http://www.smlabs.net/en/products/tsmuxer/
# http://www.videohelp.com/tools/tsMuxeR
# Interesting Open Source followup project in development: https://github.com/kierank/libmpegts
#
build_tsMuxeR() {
    start_build tsMuxeR
    cd $SRC

    if [ ! -d tsMuxeR_1.10.6 ]; then
        $CURL -H "Referer: http://www.videohelp.com/tools/tsMuxeR" -L http://www.videohelp.com/download/tsMuxeR_1.10.6.dmg > tsMuxeR_1.10.6.dmg
        exit_on_error
        createdir tsMuxeR_1.10.6
    fi

    # Nothing to build. Just open the disk image, copy the binary and detach the disk image
    $HDID tsMuxeR_1.10.6.dmg
    exit_on_error
    cp -f /Volumes/tsMuxeR/tsMuxerGUI.app/Contents/MacOS/tsMuxeR tsMuxeR_1.10.6/tsMuxeR
    cp -f tsMuxeR_1.10.6/tsMuxeR $TARGET/bin
    $HDIUTIL detach /Volumes/tsMuxeR
    cd $WORKDIR
}


##########################################
# X264
# svn://svn.videolan.org/x264/trunk
#
build_x264() {
    start_build x264
    cd $SRC

    if [ -d x264 ]; then
        cd x264
        $GIT pull git://git.videolan.org/x264.git
        exit_on_error
    else
        $GIT clone git://git.videolan.org/x264.git x264
        exit_on_error
        cd x264
    fi

    if [ "$FIXED_REVISIONS" == "yes" ]; then
        $GIT checkout "`$GIT rev-list master -n 1 --first-parent --before=2011-04-24`"
        exit_on_error
    fi

    set_flags

    if [ "$ARCHITECTURE" == "x86_64" ]; then
        ./configure --prefix=$TARGET
    else
        ./configure --prefix=$TARGET --host=x86-apple-darwin10 --disable-asm
    fi

    $MAKE -j$THREADS
    exit_on_error
    $MAKE install install-lib-static

    cd $WORKDIR
}


##########################################
# XVID
# http://www.xvid.org/
#
build_xvid() {
    start_build xvid
    cd $SRC

    if [ ! -d xvidcore-1.3.1 ]; then
        $CURL -L http://downloads.xvid.org/downloads/xvidcore-1.3.1.tar.gz > xvidcore-1.3.1.tar.gz
        exit_on_error
        $TAR xzf xvidcore-1.3.1.tar.gz -s /xvidcore/xvidcore-1.3.1/
    fi

    cd xvidcore-1.3.1/build/generic
    set_flags

    if [ "$ARCHITECTURE" == "x86_64" ]; then
        ./configure --prefix=$TARGET --host=x86-apple-darwin10
    else
        ./configure --prefix=$TARGET
    fi

    $MAKE -j$THREADS
    exit_on_error
    $MAKE install

    # Remove dynamic libraries
    rm -f $TARGET/lib/libxvidcore*.dylib

    cd $WORKDIR
}


##########################################
# ZLIB
# http://zlib.net/
#
build_zlib() {
    start_build zlib
    cd $SRC

    if [ ! -d zlib-1.2.5 ]; then
        $CURL -L http://zlib.net/zlib-1.2.5.tar.gz > zlib-1.2.5.tar.gz
        exit_on_error
        $TAR xzf zlib-1.2.5.tar.gz
    fi

    cd zlib-1.2.5
    set_flags
    ./configure --prefix=$TARGET
    $MAKE -j$THREADS
    exit_on_error
    $MAKE install

    # Remove dynamic libraries
    rm -f $TARGET/lib/libz*.dylib
    cd $WORKDIR
}


##########################################
# FFMPEG
# http://www.ffmpeg.org/
#
build_ffmpeg() {
    start_build ffmpeg
    cd $SRC
    if [ -d ffmpeg ]; then
        cd ffmpeg
        $GIT pull git://git.videolan.org/ffmpeg.git
        exit_on_error
    else
        $GIT clone git://git.videolan.org/ffmpeg.git ffmpeg
        exit_on_error
        cd ffmpeg
    fi

    if [ "$FIXED_REVISIONS" == "yes" ]; then
        $GIT checkout "`$GIT rev-list master -n 1 --first-parent --before=2011-06-13`"
        exit_on_error
    fi

    # Fix path to git in "version.sh" to avoid version "UNKNOWN"
    GIT_STR=`echo $GIT | $SED -e "s/\//\\\\\\\\\\\//g"`
    $SED -i -e "s/ git / $GIT_STR /g" version.sh

    set_flags

    # Theora/vorbis disabled for mplayer, also disabled here to avoid build errors
    ./configure --enable-gpl --enable-libmp3lame --enable-libx264 --enable-libxvid \
              --disable-libtheora --disable-libvorbis --disable-shared --prefix=$TARGET
    $MAKE -j$THREADS
    exit_on_error
    $MAKE install
    cd $WORKDIR
}



##########################################
# MPLAYER
# http://www.mplayerhq.hu/design7/news.html
#
build_mplayer() {
    start_build mplayer
    cd $SRC

    if [ "$FIXED_REVISIONS" == "yes" ]; then
        REVISION="-r 33606" # Known to work
        #REVISION="-r 29241" # Original (working) revision that is shipped with PMS-1.20.409-BETA (will not build though)
    else
        REVISION=""
    fi

    if [ -d mplayer ]; then
        cd mplayer
        $SVN update $REVISION
        exit_on_error
    else
        $SVN checkout $REVISION svn://svn.mplayerhq.hu/mplayer/trunk mplayer
        exit_on_error
        cd mplayer
    fi

    # Copy ffmpeg source to avoid making another git clone by configure
    rm -rf ffmpeg
    cp -rf $SRC/ffmpeg .

    set_flags

    # Extra flags for compiling mplayer
    export CFLAGS="-O4 -fomit-frame-pointer -pipe $CFLAGS"
    export CXXFLAGS="-O4 -fomit-frame-pointer -pipe $CXXFLAGS"

    # Fribidi, theora and vorbis support seems broken in this revision, disable it for now
    ./configure --disable-x11 --disable-gl --disable-qtx --disable-dvdread-internal \
              --disable-fribidi --disable-theora --disable-libvorbis \
              --with-freetype-config=$TARGET/bin/freetype-config --prefix=$TARGET

    # Somehow -I/usr/X11/include still made it into the config.mak, regardless of the --disable-x11
    $SED -i -e "s/-I\/usr\/X11\/include//g" config.mak

   # Fix fribidi regression (http://lists.mplayerhq.hu/pipermail/mplayer-users/2011-May/082649.html)
    $SED -i -e "s/#ifdef CONFIG_FRIBIDI/#if defined(CONFIG_FRIBIDI) \&\& \!defined(CODECS2HTML)/g" sub/subreader.h

    # Remove the ffmpeg directory and copy the compiled ffmpeg again to avoid "make" rebuilding it
    rm -rf ffmpeg
    cp -rf $SRC/ffmpeg .

    $MAKE -j$THREADS
    exit_on_error
    $MAKE install
    cd $WORKDIR
}

##########################################
# MENCODER_MT (multi-threaded)
# http://www.mplayerhq.hu/design7/news.html
# http://gitorious.org/ffmpeg/ffmpeg-mt
#
build_mencoder_mt() {
    start_build mencoder_mt
    cd $SRC

    if [ "$FIXED_REVISIONS" == "yes" ]; then
        REVISION="-r 33606" # Known to work
        #REVISION="-r 29241" # Original (working) revision that is shipped with PMS-1.20.409-BETA (will not build though)
    else
        REVISION=""
    fi

    if [ -d mencoder_mt ]; then
        cd mencoder_mt
        $SVN update $REVISION
        exit_on_error
    else
        $SVN checkout $REVISION svn://svn.mplayerhq.hu/mplayer/trunk mencoder_mt
        exit_on_error
        cd mencoder_mt
    fi

    # Remove the bundled ffmpeg and replace it with ffmpeg-mt
    rm -rf ffmpeg
    $GIT clone git://gitorious.org/~astrange/ffmpeg/ffmpeg-mt.git ffmpeg
    exit_on_error

    set_flags

    # Extra flags for compiling mplayer
    export CFLAGS="-O4 -fomit-frame-pointer -pipe $CFLAGS"
    export CXXFLAGS="-O4 -fomit-frame-pointer -pipe $CXXFLAGS"

    # Fribidi, theora and vorbis support seems broken in this revision, disable it for now
    ./configure --disable-x11 --disable-gl --disable-qtx --disable-dvdread-internal \
              --disable-fribidi --disable-theora --disable-libvorbis \
              --with-freetype-config=$TARGET/bin/freetype-config --prefix=$TARGET

    # Somehow -I/usr/X11/include still made it into the config.mak, regardless of the --disable-x11
    $SED -i -e "s/-I\/usr\/X11\/include//g" config.mak

   # Fix fribidi regression (http://lists.mplayerhq.hu/pipermail/mplayer-users/2011-May/082649.html)
    $SED -i -e "s/#ifdef CONFIG_FRIBIDI/#if defined(CONFIG_FRIBIDI) \&\& \!defined(CODECS2HTML)/g" sub/subreader.h

    $MAKE -j$THREADS
    exit_on_error
    cp mencoder $TARGET/bin/mencoder_mt
    cd $WORKDIR
}


##########################################
# PS3MEDIASERVER
# http://code.google.com/p/ps3mediaserver/
#
build_ps3mediaserver() {
    start_build ps3mediaserver
    cd $SRC

    if [ "$FIXED_REVISIONS" == "yes" ]; then
        REVISION="-r 626" # To include some important OS X fixes
    else
        REVISION=""
    fi

    if [ -d ps3mediaserver ]; then
        cd ps3mediaserver
        $SVN update $REVISION
        exit_on_error
    else
        $SVN checkout $REVISION http://ps3mediaserver.googlecode.com/svn/trunk/ps3mediaserver ps3mediaserver
        exit_on_error
        cd ps3mediaserver
    fi

    cd osx
   
    # Overwrite with the home built tools
    cp $TARGET/bin/dcraw .
    cp $TARGET/bin/ffmpeg .
    cp $TARGET/bin/flac .
    cp $TARGET/bin/mplayer .
    cp $TARGET/bin/mencoder .
    cp $TARGET/bin/mencoder_mt .
    cp $TARGET/bin/tsMuxeR .

    set_flags
    $ANT DMG
    exit_on_error

    # Add the architecture name to the final file
    PMS_FILENAME_ORIG=`ls pms-macosx-*.dmg | head -1`
    PMS_FILENAME_NEW=`echo $PMS_FILENAME_ORIG | $SED -e "s/-macosx-/-macosx-$ARCHITECTURE-/"`
    mv -f $PMS_FILENAME_ORIG $PMS_FILENAME_NEW
    cp $PMS_FILENAME_NEW $WORKDIR
    cd $WORKDIR
}


##########################################
# Finally, execute the script...
#

# Check requirements
check_xcode
check_yasm
check_git
check_jarbundler

# Initialize variables for compiling
initialize

# Build static libraries to link against
build_zlib
build_expat
build_faad2
build_fontconfig
build_freetype
build_fribidi
build_giflib
build_jpeg
build_iconv
build_ncurses
build_lame
build_libdca
build_libdv
build_libdvdcss
build_libdvdread
build_libdvdnav
build_libmad
build_libzen
# Note: libmediainfo requires libzen to build
build_libmediainfo
build_libpng
build_libogg
build_libvorbis
build_libtheora
build_lzo2
build_x264
build_xvid

# Build tools for including with PS3 Media Server
build_flac
build_dcraw
build_tsMuxeR
build_ffmpeg
build_mplayer
build_mencoder_mt

# Build PS3 Media Server itself
build_ps3mediaserver

[Raptor399]

Thanks for the updates, Redlum!

As far as I'm concerned the script is ready to be added as "contrib/build-pms-osx.sh" to SVN, or something similar.
Just don't put it in the "osx" directory, since "ant DMG" is still the preferred method to build.
Saves us from having to keep a copy around on the forums, plus it's easy enough to submit a patch.

Oh, and the "osx/OSX_README.txt" could use some revamping:

Code: Select all

Compiling PS3 Media Server on OSX
---------------------------------

This directory contains the instructions and binaries to compile PS3 Media
Server on OSX. Building PMS will result in a "pms-macosx-x.x.x.dmg" disk
image file.

Before you can compile PMS, you need to install Xcode from Apple first.
Xcode contains all build tools needed to compile PMS. If you do not have
it yet, go to http://developer.apple.com/technologies/xcode.html, create a
free Apple developer account and download Xcode and install it.

Once Xcode is installed, open a Terminal and change directory to the "osx"
directory where you found this document.

    cd ps3mediaserver/osx

Then you can use "ant" to build the disk image:

    ant DMG

This will create a new file "pms-macosx-x.x.x.dmg". Open this file in the
Finder and install PMS on your computer.


[bpwats]

Minor issue with the otherwise nice script 1.8.1
The variable $WORKDIR is undefined in check_yasm, because it is not initialized until initialize is called later in the script.
This results in an incomplete help message when yasm is not installed yet.

Thanks for your efforts,
Bryan

[Raptor399]

Minor issue with the otherwise nice script 1.8.1
The variable $WORKDIR is undefined in check_yasm, because it is not initialized until initialize is called later in the script.
This results in an incomplete help message when yasm is not installed yet.

Thanks for your efforts,
Bryan

Doh! That was pretty dumb, good thing you noticed it!
Thanks for reporting.

The patch is to replace "cd $WORKDIR" with "cd .." in check_yasm.

[MKUltra]

Some questions on the build script:
1) what is the command used to you activate the build script?
2) does MacPorts get in the way and cause problems?
3) will libmpegts replace tsmuxer?

[Redlum]

Note that this script is now part of the official repository as of revision 633 and 641. Big thanks to Raptor399!

Small update to fix some of the last things.

- Disabled mencoder_mt by default, now only needed for older revisions
- yasm fixed

Code: Select all

#!/bin/sh
#
# build-pms-osx.sh
#
# Version: 1.8.2
# Last updated: 2011-06-15
# Author: Patrick Atoon
#
#
# DESCRIPTION
#
# Building a statically linked PS3 Media Server for OSX is not an easy
# task and requires advanced knowledge of building the libraries and
# tools involved.
#
# This script will take care of building all that is required to build
# a statically linked PS3 Media Server for OSX.
# It will attempt to build universal binaries (for Intel and PCC)  where
# possible. However, some libraries do not support this and the script
# will compile for the current architecture.
#
# The script will compile the PS3 Media Server disk image file:
#
#    pms-macosx-arch-x.xx.x.dmg
#
# This script is provided as is. If it works for you, good! If it does
# not, try to figure out why and share your findings on the PS3 Media
# Server forums (http://www.ps3mediaserver.org/forum/)
#
#
# REQUIREMENTS
#
# Some Developer tools need to be installed manually. The script detects
# this and provides help. Other sources will be downloaded automatically.
#
#
# ACKNOWLEDGEMENTS
#
# Many thanks to the PS3 Media Server developers and forum moderators
# for keeping the project alive and the info coming. Special thanks to
# Adrian Stutz for sharing his findings of how to build a statically
# linked MPlayerOSX (http://www.mplayerosx.ch/), without his hard work
# this script would not have been possible. Also thanks to Redlum for
# his assistance in getting this script production ready.
#
#
# TODO
#
# - Clean up dependencies that are not needed for PMS
# - Fix fribidi
#
#
# COPYRIGHT
#
# This script is distributed under the Creative Commons Attribution 3.0
# (CC BY) license. This means you are free to copy, distribute, transmit
# and adapt it to suit your needs, as long as you mention the original
# author in your work.
# For more details, see http://creativecommons.org/licenses/by/3.0/
#
#
# CONFIGURATION
#
# Set FIXED_REVISIONS to "no" to check out the latest revisions.
# Default is "yes" to check out the last known working revision.
FIXED_REVISIONS="yes"

# Set TARGET_ARCHITECTURE for building binaries. Choose one of the following:
#
#    native: build for your own computer
#    x86_64: build for 64 bits Intel x86
#    i386: build for Intel 386
#    ppc: build for PowerPC
#
TARGET_ARCHITECTURE="i386"

# Set the amount of threads that are used for compiling everything. This
# should generally be the same as the amount of CPU cores in your computer
# (look for Total Number Of Cores in System Profiler if you don't know it).
THREADS="2"

# It should not be necessary to change anything below this line
##########################################

# Binaries
ANT=/usr/bin/ant
CURL=/usr/bin/curl
GCC=/usr/bin/gcc
GIT=/usr/local/git/bin/git
HDID=/usr/bin/hdid
HDIUTIL=/usr/bin/hdiutil
MAKE=/usr/bin/make
SED=/usr/bin/sed
SVN=/usr/bin/svn
TAR=/usr/bin/tar
YASM=/usr/local/bin/yasm
UNZIP=/usr/bin/unzip

##########################################
# Create a directory when it does not exist
#
createdir() {
    if [ ! -d $1 ]; then
        mkdir $1
    fi
}


##########################################
# Set the compiler flags to determine the architecture to compile for
# Optional parameter: architecture flags string to replace the default,
# e.g. "-arch ppc -faltivec -mcpu=7450"
#
set_flags() {
    # Minimum OS version as target
    export MACOSX_DEPLOYMENT_TARGET=10.5
    export CFLAGS="-mmacosx-version-min=10.5 -isystem /Developer/SDKs/MacOSX10.5.sdk"
    export LDFLAGS="-mmacosx-version-min=10.5 -isysroot /Developer/SDKs/MacOSX10.5.sdk -Wl,-syslibroot,/Developer/SDKs/MacOSX10.5.sdk"
    export CXXFLAGS="-mmacosx-version-min=10.5 -isysroot /Developer/SDKs/MacOSX10.5.sdk"

    if [ "$1" != "" ]; then
        # Use the supplied parameter string for architecture flags
        export CFLAGS="$CFLAGS $1"
        export LDFLAGS="$LDFLAGS $1"
        export CXXFLAGS="$CXXFLAGS $1"
    else
        # Uncomment for single architecture binary
        export CFLAGS="$CFLAGS -arch $ARCHITECTURE"
        export LDFLAGS="$LDFLAGS -arch $ARCHITECTURE"
        export CXXFLAGS="$CXXFLAGS -arch $ARCHITECTURE"
    fi

    # Paths of the build environment
    export LDFLAGS="$LDFLAGS -L$TARGET/lib -Wl,-search_paths_first"
    export CFLAGS="$CFLAGS -I$TARGET/include"
    export CXXFLAGS="$CXXFLAGS -I$TARGET/include"
}


##########################################
# Initialize building environment
#
initialize() {
    WORKDIR=`pwd`

    # Directories for statically compiled libraries
    TARGET="$WORKDIR/target"
    SRC="$WORKDIR/src"
    createdir "$SRC"
    createdir "$TARGET"

    if [ "$TARGET_ARCHITECTURE" == "native" ]; then
        ARCHITECTURE=`/usr/bin/uname -p`
    else
        ARCHITECTURE=$TARGET_ARCHITECTURE
    fi

    # Set default compiler flags
    set_flags

    # Reset paths for compiling
    export PATH="$TARGET/bin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/X11/bin"
    export PKG_CONFIG_PATH=""
}


##########################################
# Check for gcc, make, svn, ant and curl
#
check_xcode() {
    if [ ! -x $GCC -o ! -x $SVN -o ! -x $ANT -o ! -x $CURL -o ! -x $MAKE ]; then
        cat << EOM
It seems you are missing Xcode from Apple, which is required to run this script.

Please go to http://developer.apple.com/technologies/xcode.html, create a free
Apple developer account and download Xcode and install it.
EOM
        exit;
    fi
}


##########################################
# Check for yasm
#
check_yasm() {
    if [ ! -x $YASM ]; then
        cat << EOM
It seems you are missing "yasm", which is required to run this script.
Please run the following commands to install "yasm":

    $SVN checkout http://www.tortall.net/svn/yasm/trunk/yasm yasm
    cd yasm
    ./autogen.sh
    ./configure
    make
    sudo make install
    cd ..

EOM
        exit;
    fi
}


##########################################
# Check for git
#
check_git() {
    if [ ! -x $GIT ]; then
        cat << EOM
It seems you are missing "git", which is required to run this script.
Please go to http://code.google.com/p/git-osx-installer/, download git
and install it.
EOM
        exit;
    fi
}


##########################################
# Check for jarbundler
#
check_jarbundler() {
    # See if the jar file exists
    ls /usr/share/ant/lib/jarbundler-*.jar > /dev/null 2>&1

    if [ "$?" == "1" ]; then
        cat << EOM
It seems you are missing "jarbundler", which is required to run this script.
Please go to http://www.informagen.com/JarBundler/ , download the jarbundler
and install it.
EOM
        exit;
    fi
}


##########################################
# Exit if the previous command ended with an error status
#
exit_on_error() {
    if [ "$?" != "0" ]; then
        echo Fatal error occurred, aborting build.
        cd $WORKDIR
        exit
    fi
}


##########################################
# Building start marker to more easily follow the build process
#
start_build() {
    cat << EOM


--------------------------------------------------------------------------------------
Building $1
--------------------------------------------------------------------------------------

EOM
}



##########################################
# DCRAW
# http://www.cybercom.net/~dcoffin/dcraw/
#
build_dcraw() {
    start_build dcraw
    cd $SRC

    if [ ! -d dcraw-9.07 ]; then
        $CURL -L http://www.cybercom.net/~dcoffin/dcraw/archive/dcraw-9.07.tar.gz > dcraw-9.07.tar.gz
        exit_on_error
        $TAR xzf dcraw-9.07.tar.gz -s /dcraw/dcraw-9.07/
    fi

    cd dcraw-9.07
    set_flags
    $GCC -O4 -o dcraw dcraw.c -lm -ljpeg -DNO_LCMS $CFLAGS -L$TARGET/lib
    exit_on_error
    createdir $TARGET/bin
    cp dcraw $TARGET/bin
    cd $WORKDIR
}


##########################################
# EXPAT
# http://expat.sourceforge.net/
#
build_expat() {
    start_build expat
    cd $SRC

    if [ ! -d expat-2.0.1 ]; then
        $CURL -L http://downloads.sourceforge.net/project/expat/expat/2.0.1/expat-2.0.1.tar.gz > expat-2.0.1.tar.gz
        exit_on_error
        $TAR xzf expat-2.0.1.tar.gz
    fi

    cd expat-2.0.1
    set_flags
    ./configure --disable-shared --disable-dependency-tracking --prefix=$TARGET
    $MAKE -j$THREADS
    exit_on_error
    $MAKE install
    cd $WORKDIR
}


##########################################
# FAAD2
# http://www.audiocoding.com/faad2.html
#
build_faad2() {
    start_build faad2
    cd $SRC

    if [ ! -d faad2-2.7 ]; then
        $CURL -L http://downloads.sourceforge.net/project/faac/faad2-src/faad2-2.7/faad2-2.7.tar.gz > faad2-2.7.tar.gz
        exit_on_error
        $TAR xzf faad2-2.7.tar.gz
    fi

    cd faad2-2.7
    set_flags
    ./configure --disable-shared --disable-dependency-tracking --prefix=$TARGET
    $MAKE -j$THREADS
    exit_on_error
    $MAKE install
    cd $WORKDIR
}


##########################################
# FLAC
# http://flac.sourceforge.net/
#
build_flac() {
    start_build flac
    cd $SRC

    if [ ! -d flac-1.2.1 ]; then
        $CURL -L http://downloads.xiph.org/releases/flac/flac-1.2.1.tar.gz > flac-1.2.1.tar.gz
        exit_on_error
        $TAR xzf flac-1.2.1.tar.gz
    fi

    cd flac-1.2.1
    set_flags

    if [ "$ARCHITECTURE" == "x86_64" ]; then
        ./configure --disable-shared --disable-dependency-tracking --host=x86-apple-darwin10 --prefix=$TARGET
    else
        ./configure --disable-shared --disable-dependency-tracking --disable-asm-optimizations --prefix=$TARGET
    fi

    $MAKE -j$THREADS
    exit_on_error
    $MAKE install
    cd $WORKDIR
}


##########################################
# FONTCONFIG
# http://fontconfig.org/wiki/
#
build_fontconfig() {
    start_build fontconfig
    cd $SRC

    if [ ! -d fontconfig-2.8.0 ]; then
        $CURL -L http://www.freedesktop.org/software/fontconfig/release/fontconfig-2.8.0.tar.gz > fontconfig-2.8.0.tar.gz
        exit_on_error
        $TAR xzf fontconfig-2.8.0.tar.gz
    fi

    cd fontconfig-2.8.0
    set_flags
    ./configure --disable-shared --disable-dependency-tracking --prefix=$TARGET
    $MAKE -j$THREADS
    exit_on_error
    $MAKE install
    cd $WORKDIR
}


##########################################
# FREETYPE
# http://www.freetype.org/
#
build_freetype() {
    start_build freetype
    cd $SRC

    if [ ! -d freetype-2.4.4 ]; then
        $CURL -L http://download.savannah.gnu.org/releases/freetype/freetype-2.4.4.tar.gz > freetype-2.4.4.tar.gz
        exit_on_error
        $TAR xzf freetype-2.4.4.tar.gz
    fi

    cd freetype-2.4.4
    set_flags
    ./configure --disable-shared --disable-dependency-tracking --prefix=$TARGET
    $MAKE -j$THREADS
    exit_on_error
    $MAKE install
    cd $WORKDIR
}


##########################################
# FRIBIDI
# http://fribidi.org/
#
build_fribidi() {
    start_build fribidi
    cd $SRC

    if [ ! -d fribidi-0.19.2 ]; then
        $CURL -L http://fribidi.org/download/fribidi-0.19.2.tar.gz > fribidi-0.19.2.tar.gz
        exit_on_error
        $TAR xzf fribidi-0.19.2.tar.gz
    fi

    cd fribidi-0.19.2
    set_flags
    ./configure --disable-shared --disable-dependency-tracking --prefix=$TARGET
    $MAKE -j$THREADS
    exit_on_error
    $MAKE install
    cd $WORKDIR
}


##########################################
# GIFLIB
# http://sourceforge.net/projects/giflib/
#
build_giflib() {
    start_build giflib
    cd $SRC

    if [ ! -d giflib-4.1.6 ]; then
        $CURL -L http://downloads.sourceforge.net/project/giflib/giflib%204.x/giflib-4.1.6/giflib-4.1.6.tar.bz2 > giflib-4.1.6.tar.bz2
        exit_on_error
        $TAR xjf giflib-4.1.6.tar.bz2
    fi

    cd giflib-4.1.6
    set_flags
    ./configure --disable-shared --disable-dependency-tracking --prefix=$TARGET
    $MAKE -j$THREADS
    exit_on_error
    $MAKE install
    cd $WORKDIR
}


##########################################
# ICONV
# http://www.gnu.org/software/libiconv/
#
build_iconv() {
    start_build iconv
    cd $SRC

    if [ ! -d libiconv-1.13.1 ]; then
        $CURL -L http://ftp.gnu.org/pub/gnu/libiconv/libiconv-1.13.1.tar.gz > libiconv-1.13.1.tar.gz
        exit_on_error
        $TAR xzf libiconv-1.13.1.tar.gz
    fi

    cd libiconv-1.13.1
    set_flags
    ./configure --disable-shared --disable-dependency-tracking --prefix=$TARGET
    $MAKE -j$THREADS
    exit_on_error
    $MAKE install
    cd $WORKDIR
}


##########################################
# JPEG
# http://www.ijg.org/
#
build_jpeg() {
    start_build jpeg
    cd $SRC

    if [ ! -d jpeg-8c ]; then
        $CURL -L http://www.ijg.org/files/jpegsrc.v8c.tar.gz > jpegsrc.v8c.tar.gz
        exit_on_error
        $TAR xzf jpegsrc.v8c.tar.gz
    fi

    cd jpeg-8c
    set_flags
    ./configure --disable-shared --disable-dependency-tracking --prefix=$TARGET
    $MAKE -j$THREADS
    exit_on_error
    $MAKE install
    cd $WORKDIR
}


##########################################
# LAME
# http://lame.sourceforge.net/
#
build_lame() {
    start_build lame
    cd $SRC

    if [ ! -d lame-3.98.4 ]; then
        $CURL -L http://downloads.sourceforge.net/project/lame/lame/3.98.4/lame-3.98.4.tar.gz > lame-3.98.4.tar.gz
        exit_on_error
        $TAR xzf lame-3.98.4.tar.gz
    fi

    cd lame-3.98.4
    set_flags
    ./configure --disable-shared --disable-dependency-tracking --prefix=$TARGET
    $MAKE -j$THREADS
    exit_on_error
    $MAKE install
    cd $WORKDIR
}


##########################################
# LIBDCA
# http://www.videolan.org/developers/libdca.html
#
build_libdca() {
    start_build libdca
    cd $SRC

    if [ ! -d libdca-0.0.5 ]; then
        $CURL -L http://download.videolan.org/pub/videolan/libdca/0.0.5/libdca-0.0.5.tar.bz2 > libdca-0.0.5.tar.bz2
        exit_on_error
        $TAR xjf libdca-0.0.5.tar.bz2
    fi

    cd libdca-0.0.5
    set_flags
    ./configure --disable-shared --disable-dependency-tracking --prefix=$TARGET
    $MAKE -j$THREADS
    exit_on_error
    $MAKE install
    cd $WORKDIR
}


##########################################
# LIBDV
# http://libdv.sourceforge.net/
#
build_libdv() {
    start_build libdv
    cd $SRC

    if [ ! -d libdv-1.0.0 ]; then
        $CURL -L http://downloads.sourceforge.net/project/libdv/libdv/1.0.0/libdv-1.0.0.tar.gz > libdv-1.0.0.tar.gz
        exit_on_error
        $TAR xzf libdv-1.0.0.tar.gz
    fi

    cd libdv-1.0.0
    set_flags
    export LDFLAGS="$LDFLAGS -flat_namespace -undefined suppress"
    ./configure --disable-shared --disable-dependency-tracking --disable-xv \
        --disable-gtk --disable-sdl --disable-asm --prefix=$TARGET
    $MAKE -j$THREADS
    exit_on_error
    $MAKE install
    cd $WORKDIR
}


##########################################
# LIBDVDCSS
# http://www.videolan.org/developers/libdvdcss.html
#
build_libdvdcss() {
    start_build libdvdcss
    cd $SRC

    if [ ! -d libdvdcss-1.2.9 ]; then
        $CURL -L http://download.videolan.org/pub/libdvdcss/1.2.9/libdvdcss-1.2.9.tar.gz > libdvdcss-1.2.9.tar.gz
        exit_on_error
        $TAR xzf libdvdcss-1.2.9.tar.gz
    fi

    cd libdvdcss-1.2.9
    set_flags
    ./configure --disable-shared --disable-dependency-tracking --prefix=$TARGET
    $MAKE -j$THREADS
    exit_on_error
    $MAKE install
    cd $WORKDIR
}


##########################################
# LIBDVDNAV
# svn://svn.mplayerhq.hu/dvdnav/trunk/libdvdnav/
#
build_libdvdnav() {
    start_build libdvdnav
    cd $SRC

    if [ "$FIXED_REVISIONS" == "yes" ]; then
        REVISION="-r 1226"
    else
        REVISION=""
    fi

    if [ ! -d libdvdnav ]; then
        $SVN checkout $REVISION svn://svn.mplayerhq.hu/dvdnav/trunk/libdvdnav/ libdvdnav
        exit_on_error
        cd libdvdnav
    else
        cd libdvdnav
        $SVN update $REVISION
        exit_on_error
    fi

    set_flags
    ./autogen.sh --with-dvdread-config=$TARGET/bin/dvdread-config --disable-shared --disable-dependency-tracking --prefix=$TARGET
    $MAKE -j$THREADS
    exit_on_error
    $MAKE install
    cd $WORKDIR
}

##########################################
# LIBDVDREAD
# svn://svn.mplayerhq.hu/dvdnav/trunk/libdvdread/
#
build_libdvdread() {
    start_build libdvdread
    cd $SRC

    if [ "$FIXED_REVISIONS" == "yes" ]; then
        REVISION="-r 1226"
    else
        REVISION=""
    fi

    if [ ! -d libdvdread ]; then
        $SVN checkout $REVISION svn://svn.mplayerhq.hu/dvdnav/trunk/libdvdread/ libdvdread
        exit_on_error
        cd libdvdread
    else
        cd libdvdread
        $SVN update $REVISION
        exit_on_error
    fi

    set_flags
    ./autogen.sh --disable-shared --disable-dependency-tracking --prefix=$TARGET
    $MAKE -j$THREADS
    exit_on_error
    $MAKE install
    cd $WORKDIR
}


##########################################
# LIBMAD
# http://www.underbit.com/products/mad/
#
build_libmad() {
    start_build libmad
    cd $SRC

    if [ ! -d libmad-0.15.1b ]; then
        $CURL -L ftp://ftp.mars.org/pub/mpeg/libmad-0.15.1b.tar.gz > libmad-0.15.1b.tar.gz
        exit_on_error
        $TAR xzf libmad-0.15.1b.tar.gz
    fi

    cd libmad-0.15.1b
    set_flags
    ./configure --disable-shared --disable-dependency-tracking --prefix=$TARGET
    $MAKE -j$THREADS
    exit_on_error
    $MAKE install
    cd $WORKDIR
}


##########################################
# LIBMEDIAINFO
# http://sourceforge.net/projects/mediainfo/
#
build_libmediainfo() {
    start_build libmediainfo
    cd $SRC

    if [ ! -d libmediainfo_0.7.44 ]; then
        $CURL -L http://downloads.sourceforge.net/project/mediainfo/source/libmediainfo/0.7.44/libmediainfo_0.7.44.tar.bz2 > libmediainfo_0.7.44.tar.bz2
        exit_on_error
        $TAR xjf libmediainfo_0.7.44.tar.bz2 -s /MediaInfoLib/libmediainfo_0.7.44/
    fi

    cd libmediainfo_0.7.44
    cd Project/GNU/Library
    export CFLAGS=
    export LDFLAGS=
    export CXXFLAGS=

    # Note: libmediainfo requires libzen source to compile
    ./autogen
    ./configure --enable-arch-i386 --disable-shared --disable-dependency-tracking --prefix=$TARGET
    $MAKE -j$THREADS
    exit_on_error
    $MAKE install
    cd $WORKDIR
}


##########################################
# LIBPNG
# http://www.libpng.org/pub/png/libpng.html
#
build_libpng() {
    start_build libpng
    cd $SRC

    if [ ! -d libpng-1.5.2 ]; then
        $CURL -L http://downloads.sourceforge.net/project/libpng/libpng15/1.5.2/libpng-1.5.2.tar.gz > libpng-1.5.2.tar.gz
        exit_on_error
        $TAR xzf libpng-1.5.2.tar.gz
    fi

    cd libpng-1.5.2
    set_flags
    ./configure --disable-shared --disable-dependency-tracking --prefix=$TARGET
    $MAKE -j$THREADS
    exit_on_error
    $MAKE install
    cd $WORKDIR
}


##########################################
# LIBOGG
# http://xiph.org/downloads/
#
build_libogg() {
    start_build libogg
    cd $SRC

    if [ ! -d libogg-1.2.2 ]; then
        $CURL -L http://downloads.xiph.org/releases/ogg/libogg-1.2.2.tar.gz > libogg-1.2.2.tar.gz
        exit_on_error
        $TAR xzf libogg-1.2.2.tar.gz
    fi

    cd libogg-1.2.2
    set_flags
    ./configure --disable-shared --disable-dependency-tracking --prefix=$TARGET
    $MAKE -j$THREADS
    exit_on_error
    $MAKE install
    cd $WORKDIR
}


##########################################
# LIBVORBIS
# http://xiph.org/downloads/
#
build_libvorbis() {
    start_build libvorbis
    cd $SRC

    if [ ! -d libvorbis-1.3.2 ]; then
        $CURL -L http://downloads.xiph.org/releases/vorbis/libvorbis-1.3.2.tar.gz > libvorbis-1.3.2.tar.gz
        exit_on_error
        $TAR xzf libvorbis-1.3.2.tar.gz
    fi

    cd libvorbis-1.3.2
    set_flags
    ./configure --disable-shared --disable-dependency-tracking --with-ogg=$TARGET --prefix=$TARGET
    $MAKE -j$THREADS
    exit_on_error
    $MAKE install
    cd $WORKDIR
}


##########################################
# LIBTHEORA
# http://xiph.org/downloads/
#
build_libtheora() {
    start_build libtheora
    cd $SRC

    if [ ! -d libtheora-1.1.1 ]; then
        $CURL -L http://downloads.xiph.org/releases/theora/libtheora-1.1.1.tar.bz2 > libtheora-1.1.1.tar.bz2
        exit_on_error
        $TAR xjf libtheora-1.1.1.tar.bz2
    fi

    cd libtheora-1.1.1
    set_flags
    ./configure --disable-shared --disable-dependency-tracking --with-ogg=$TARGET \
        --with-vorbis=$TARGET --prefix=$TARGET
    $MAKE -j$THREADS
    exit_on_error
    $MAKE install
    cd $WORKDIR
}


##########################################
# LIBZEN
# http://sourceforge.net/projects/zenlib/
#
build_libzen() {
    start_build libzen
    cd $SRC

    if [ ! -d libzen_0.4.19 ]; then
        $CURL -L http://downloads.sourceforge.net/project/zenlib/ZenLib%20-%20Sources/0.4.19/libzen_0.4.19.tar.bz2 > libzen_0.4.19.tar.bz2
        exit_on_error
        $TAR xjf libzen_0.4.19.tar.bz2 -s /ZenLib/libzen_0.4.19/

        # libmediainfo needs this
        ln -s libzen_0.4.19 ZenLib
    fi

    cd libzen_0.4.19
    cd Project/GNU/Library
    export CFLAGS=
    export LDFLAGS=
    export CXXFLAGS=
    ./autogen
    ./configure --enable-arch-i386 --disable-shared --disable-dependency-tracking --prefix=$TARGET
    $MAKE -j$THREADS
    exit_on_error
    $MAKE install
    cd $WORKDIR
}


##########################################
# LZO2
# http://www.oberhumer.com/opensource/lzo/
#
build_lzo2() {
    start_build lzo2
    cd $SRC

    if [ ! -d lzo-2.04 ]; then
        $CURL -L http://www.oberhumer.com/opensource/lzo/download/lzo-2.04.tar.gz > lzo-2.04.tar.gz
        exit_on_error
        $TAR xzf lzo-2.04.tar.gz
    fi

    cd lzo-2.04
    set_flags

    if [ "$ARCHITECTURE" == "i386" ] || [ "$ARCHITECTURE" == "x86_64" ] ; then
        ./configure --disable-shared --disable-dependency-tracking --prefix=$TARGET
    else
        ./configure --disable-shared --disable-dependency-tracking --disable-asm --prefix=$TARGET
    fi

    $MAKE -j$THREADS
    exit_on_error
    $MAKE install
    cd $WORKDIR
}


##########################################
# NCURSES
# http://www.gnu.org/software/ncurses/
#
build_ncurses() {
    start_build ncurses
    cd $SRC

    if [ ! -d ncurses-5.9 ]; then
        $CURL -L http://ftp.gnu.org/pub/gnu/ncurses/ncurses-5.9.tar.gz > ncurses-5.9.tar.gz
        exit_on_error
        $TAR xzf ncurses-5.9.tar.gz
    fi

    cd ncurses-5.9
    set_flags
    ./configure --without-shared --disable-shared --disable-dependency-tracking --prefix=$TARGET
    $MAKE libs
    exit_on_error
    $MAKE install.libs
    cd $WORKDIR
}


##########################################
# TSMUXER
# http://www.smlabs.net/en/products/tsmuxer/
# http://www.videohelp.com/tools/tsMuxeR
# Interesting Open Source followup project in development: https://github.com/kierank/libmpegts
#
build_tsMuxeR() {
    start_build tsMuxeR
    cd $SRC

    if [ ! -d tsMuxeR_1.10.6 ]; then
        $CURL -H "Referer: http://www.videohelp.com/tools/tsMuxeR" -L http://www.videohelp.com/download/tsMuxeR_1.10.6.dmg > tsMuxeR_1.10.6.dmg
        exit_on_error
        createdir tsMuxeR_1.10.6
    fi

    # Nothing to build. Just open the disk image, copy the binary and detach the disk image
    $HDID tsMuxeR_1.10.6.dmg
    exit_on_error
    cp -f /Volumes/tsMuxeR/tsMuxerGUI.app/Contents/MacOS/tsMuxeR tsMuxeR_1.10.6/tsMuxeR
    cp -f tsMuxeR_1.10.6/tsMuxeR $TARGET/bin
    $HDIUTIL detach /Volumes/tsMuxeR
    cd $WORKDIR
}


##########################################
# X264
# svn://svn.videolan.org/x264/trunk
#
build_x264() {
    start_build x264
    cd $SRC

    if [ -d x264 ]; then
        cd x264
        $GIT pull git://git.videolan.org/x264.git
        exit_on_error
    else
        $GIT clone git://git.videolan.org/x264.git x264
        exit_on_error
        cd x264
    fi

    if [ "$FIXED_REVISIONS" == "yes" ]; then
        $GIT checkout "`$GIT rev-list master -n 1 --first-parent --before=2011-04-24`"
        exit_on_error
    fi

    set_flags

    if [ "$ARCHITECTURE" == "x86_64" ]; then
        ./configure --prefix=$TARGET
    else
        ./configure --prefix=$TARGET --host=x86-apple-darwin10 --disable-asm
    fi

    $MAKE -j$THREADS
    exit_on_error
    $MAKE install install-lib-static

    cd $WORKDIR
}


##########################################
# XVID
# http://www.xvid.org/
#
build_xvid() {
    start_build xvid
    cd $SRC

    if [ ! -d xvidcore-1.3.1 ]; then
        $CURL -L http://downloads.xvid.org/downloads/xvidcore-1.3.1.tar.gz > xvidcore-1.3.1.tar.gz
        exit_on_error
        $TAR xzf xvidcore-1.3.1.tar.gz -s /xvidcore/xvidcore-1.3.1/
    fi

    cd xvidcore-1.3.1/build/generic
    set_flags

    if [ "$ARCHITECTURE" == "x86_64" ]; then
        ./configure --prefix=$TARGET --host=x86-apple-darwin10
    else
        ./configure --prefix=$TARGET
    fi

    $MAKE -j$THREADS
    exit_on_error
    $MAKE install

    # Remove dynamic libraries
    rm -f $TARGET/lib/libxvidcore*.dylib

    cd $WORKDIR
}


##########################################
# ZLIB
# http://zlib.net/
#
build_zlib() {
    start_build zlib
    cd $SRC

    if [ ! -d zlib-1.2.5 ]; then
        $CURL -L http://zlib.net/zlib-1.2.5.tar.gz > zlib-1.2.5.tar.gz
        exit_on_error
        $TAR xzf zlib-1.2.5.tar.gz
    fi

    cd zlib-1.2.5
    set_flags
    ./configure --prefix=$TARGET
    $MAKE -j$THREADS
    exit_on_error
    $MAKE install

    # Remove dynamic libraries
    rm -f $TARGET/lib/libz*.dylib
    cd $WORKDIR
}


##########################################
# FFMPEG
# http://www.ffmpeg.org/
#
build_ffmpeg() {
    start_build ffmpeg
    cd $SRC
    if [ -d ffmpeg ]; then
        cd ffmpeg
        $GIT pull git://git.videolan.org/ffmpeg.git
        exit_on_error
    else
        $GIT clone git://git.videolan.org/ffmpeg.git ffmpeg
        exit_on_error
        cd ffmpeg
    fi

    if [ "$FIXED_REVISIONS" == "yes" ]; then
        $GIT checkout "`$GIT rev-list master -n 1 --first-parent --before=2011-06-13`"
        exit_on_error
    fi

    # Fix path to git in "version.sh" to avoid version "UNKNOWN"
    GIT_STR=`echo $GIT | $SED -e "s/\//\\\\\\\\\\\//g"`
    $SED -i -e "s/ git / $GIT_STR /g" version.sh

    set_flags

    # Theora/vorbis disabled for mplayer, also disabled here to avoid build errors
    ./configure --enable-gpl --enable-libmp3lame --enable-libx264 --enable-libxvid \
              --disable-libtheora --disable-libvorbis --disable-shared --prefix=$TARGET
    $MAKE -j$THREADS
    exit_on_error
    $MAKE install
    cd $WORKDIR
}



##########################################
# MPLAYER
# http://www.mplayerhq.hu/design7/news.html
#
build_mplayer() {
    start_build mplayer
    cd $SRC

    if [ "$FIXED_REVISIONS" == "yes" ]; then
        REVISION="-r 33606" # Known to work
        #REVISION="-r 29241" # Original (working) revision that is shipped with PMS-1.20.409-BETA (will not build though)
    else
        REVISION=""
    fi

    if [ -d mplayer ]; then
        cd mplayer
        $SVN update $REVISION
        exit_on_error
    else
        $SVN checkout $REVISION svn://svn.mplayerhq.hu/mplayer/trunk mplayer
        exit_on_error
        cd mplayer
    fi

    # Copy ffmpeg source to avoid making another git clone by configure
    rm -rf ffmpeg
    cp -rf $SRC/ffmpeg .

    set_flags

    # Extra flags for compiling mplayer
    export CFLAGS="-O4 -fomit-frame-pointer -pipe $CFLAGS"
    export CXXFLAGS="-O4 -fomit-frame-pointer -pipe $CXXFLAGS"

    # Fribidi, theora and vorbis support seems broken in this revision, disable it for now
    ./configure --disable-x11 --disable-gl --disable-qtx --disable-dvdread-internal \
              --disable-fribidi --disable-theora --disable-libvorbis \
              --with-freetype-config=$TARGET/bin/freetype-config --prefix=$TARGET

    # Somehow -I/usr/X11/include still made it into the config.mak, regardless of the --disable-x11
    $SED -i -e "s/-I\/usr\/X11\/include//g" config.mak

   # Fix fribidi regression (http://lists.mplayerhq.hu/pipermail/mplayer-users/2011-May/082649.html)
    $SED -i -e "s/#ifdef CONFIG_FRIBIDI/#if defined(CONFIG_FRIBIDI) \&\& \!defined(CODECS2HTML)/g" sub/subreader.h

    # Remove the ffmpeg directory and copy the compiled ffmpeg again to avoid "make" rebuilding it
    rm -rf ffmpeg
    cp -rf $SRC/ffmpeg .

    $MAKE -j$THREADS
    exit_on_error
    $MAKE install
    cd $WORKDIR
}

##########################################
# MENCODER_MT (multi-threaded)
# http://www.mplayerhq.hu/design7/news.html
# http://gitorious.org/ffmpeg/ffmpeg-mt
#
build_mencoder_mt() {
    start_build mencoder_mt
    cd $SRC

    if [ "$FIXED_REVISIONS" == "yes" ]; then
        REVISION="-r 33606" # Known to work
        #REVISION="-r 29241" # Original (working) revision that is shipped with PMS-1.20.409-BETA (will not build though)
    else
        REVISION=""
    fi

    if [ -d mencoder_mt ]; then
        cd mencoder_mt
        $SVN update $REVISION
        exit_on_error
    else
        $SVN checkout $REVISION svn://svn.mplayerhq.hu/mplayer/trunk mencoder_mt
        exit_on_error
        cd mencoder_mt
    fi

    # Remove the bundled ffmpeg and replace it with ffmpeg-mt
    rm -rf ffmpeg
    $GIT clone git://gitorious.org/~astrange/ffmpeg/ffmpeg-mt.git ffmpeg
    exit_on_error

    set_flags

    # Extra flags for compiling mplayer
    export CFLAGS="-O4 -fomit-frame-pointer -pipe $CFLAGS"
    export CXXFLAGS="-O4 -fomit-frame-pointer -pipe $CXXFLAGS"

    # Fribidi, theora and vorbis support seems broken in this revision, disable it for now
    ./configure --disable-x11 --disable-gl --disable-qtx --disable-dvdread-internal \
              --disable-fribidi --disable-theora --disable-libvorbis \
              --with-freetype-config=$TARGET/bin/freetype-config --prefix=$TARGET

    # Somehow -I/usr/X11/include still made it into the config.mak, regardless of the --disable-x11
    $SED -i -e "s/-I\/usr\/X11\/include//g" config.mak

   # Fix fribidi regression (http://lists.mplayerhq.hu/pipermail/mplayer-users/2011-May/082649.html)
    $SED -i -e "s/#ifdef CONFIG_FRIBIDI/#if defined(CONFIG_FRIBIDI) \&\& \!defined(CODECS2HTML)/g" sub/subreader.h

    $MAKE -j$THREADS
    exit_on_error
    cp mencoder $TARGET/bin/mencoder_mt
    cd $WORKDIR
}


##########################################
# PS3MEDIASERVER
# http://code.google.com/p/ps3mediaserver/
#
build_ps3mediaserver() {
    start_build ps3mediaserver
    cd $SRC

    if [ "$FIXED_REVISIONS" == "yes" ]; then
        REVISION="-r 626" # To include some important OS X fixes
    else
        REVISION=""
    fi

    if [ -d ps3mediaserver ]; then
        cd ps3mediaserver
        $SVN update $REVISION
        exit_on_error
    else
        $SVN checkout $REVISION http://ps3mediaserver.googlecode.com/svn/trunk/ps3mediaserver ps3mediaserver
        exit_on_error
        cd ps3mediaserver
    fi

    cd osx
   
    # Overwrite with the home built tools
    cp $TARGET/bin/dcraw .
    cp $TARGET/bin/ffmpeg .
    cp $TARGET/bin/flac .
    cp $TARGET/bin/mplayer .
    cp $TARGET/bin/mencoder .
    # Mencoder_mt is only needed for older revisions of mplayer, the latest revisions include multithreading by default
    #cp $TARGET/bin/mencoder_mt .
    cp $TARGET/bin/tsMuxeR .

    set_flags
    $ANT DMG
    exit_on_error

    # Add the architecture name to the final file
    PMS_FILENAME_ORIG=`ls pms-macosx-*.dmg | head -1`
    PMS_FILENAME_NEW=`echo $PMS_FILENAME_ORIG | $SED -e "s/-macosx-/-macosx-$ARCHITECTURE-/"`
    mv -f $PMS_FILENAME_ORIG $PMS_FILENAME_NEW
    cp $PMS_FILENAME_NEW $WORKDIR
    cd $WORKDIR
}


##########################################
# Finally, execute the script...
#

# Check requirements
check_xcode
check_yasm
check_git
check_jarbundler

# Initialize variables for compiling
initialize

# Build static libraries to link against
build_zlib
build_expat
build_faad2
build_fontconfig
build_freetype
build_fribidi
build_giflib
build_jpeg
build_iconv
build_ncurses
build_lame
build_libdca
build_libdv
build_libdvdcss
build_libdvdread
build_libdvdnav
build_libmad
build_libzen
# Note: libmediainfo requires libzen to build
build_libmediainfo
build_libpng
build_libogg
build_libvorbis
build_libtheora
build_lzo2
build_x264
build_xvid

# Build tools for including with PS3 Media Server
build_flac
build_dcraw
build_tsMuxeR
build_ffmpeg
build_mplayer
# Mencoder_mt is only needed for older revisions of mplayer, the latest revisions include multithreading by default
#build_mencoder_mt

# Build PS3 Media Server itself
build_ps3mediaserver

[Raptor399]

Some questions on the build script:
1) what is the command used to you activate the build script?
2) does MacPorts get in the way and cause problems?
3) will libmpegts replace tsmuxer?

1) If you are not used to executing scripts in a shell environment, it might be wiser to steer clear of this script!
You are far better off following Otmanix's compile instructions instead.

However, if you feel comfortable with it and want to persist, you could try and follow the instructions earlier in this thread.

2) No. The script builds its own 'reality' of libraries and includes in a directory that you determine. It will not bite MacPorts or the other way around.

3) No, tsMuxeR will still be used.

Hope that helps.

[MKUltra]

Thanx Raptor - just needed a kick start to activate the script - it's doing its thing right now!