Corrupted Data error

[jupiter_spunk]

1- Your computer specs (cpu, memory, O/S) and the precise version of PMS that you're using (eg 1.10.51 or r409, not "latest version")
2.8 ghz Intel Quad Core, 8GB Ram, gigabyte UD3LR v1 integrated ethernet and audio geforce 8400-1gb

Linux Mint 11

ps3mediaserver 1.50.0

2- Device you are streaming to (PS3, XBox360, etc) and the .conf file if using a custom renderer profile
PS3 Slim

3- Your local network setup (WAN/ISP bandwidth does not matter) including connection type (Wifi, homeplugs, 100mbit ethernet, gigabit) and what you're connected through (direct connection, switch, router) --> e.g. PC <-Wifi G-> Linksys WRT54G Router <-100mbps-> PS3

PC eth0 ->Dlink WGT624 V4 > linksys Switch > PS3


4- Which engine you are using if you're transcoding (MEncoder, AviSynth/MEncoder, TSmuxer)
Default.

5- Detailed information on what is not working
Receiving Data Corrupted when playing HD MKV files that worked in the past prior to reloading with mint 11

6- A debug.log file excerpt or the whole file - http://ps3mediaserver.org/forum/viewtop ... 484#p38484
Attatched with other logs in pmslogs.tar

7- The text output from MediaInfo (it's a program, click the link) can usually help figure out what's going on if you're having issues with a specific file or file type.

.MKV files that worked previously before upgrading to 11

pmslogs.tar

(479 Bytes) Downloaded 29 times

I followed the linux install instructions on the ubuntu site.

https://help.ubuntu.com/community/Ps3MediaServer

[sampras]

hey, I see the same thing on a new install of ubuntu 11.10, I know that's no help to you but atleast you are not alone.

[thoren]

1- Your computer specs (cpu, memory, O/S) and the precise version of PMS that you're using (eg 1.10.51 or r409, not "latest version")
2.8 ghz Intel Quad Core, 8GB Ram, gigabyte UD3LR v1 integrated ethernet and audio geforce 8400-1gb

Linux Mint 11

ps3mediaserver 1.50.0

2- Device you are streaming to (PS3, XBox360, etc) and the .conf file if using a custom renderer profile
PS3 Slim

3- Your local network setup (WAN/ISP bandwidth does not matter) including connection type (Wifi, homeplugs, 100mbit ethernet, gigabit) and what you're connected through (direct connection, switch, router) --> e.g. PC <-Wifi G-> Linksys WRT54G Router <-100mbps-> PS3

PC eth0 ->Dlink WGT624 V4 > linksys Switch > PS3


4- Which engine you are using if you're transcoding (MEncoder, AviSynth/MEncoder, TSmuxer)
Default.

5- Detailed information on what is not working
Receiving Data Corrupted when playing HD MKV files that worked in the past prior to reloading with mint 11

6- A debug.log file excerpt or the whole file - http://ps3mediaserver.org/forum/viewtop ... 484#p38484
Attatched with other logs in pmslogs.tar

7- The text output from MediaInfo (it's a program, click the link) can usually help figure out what's going on if you're having issues with a specific file or file type.

.MKV files that worked previously before upgrading to 11

pmslogs.tar

I followed the linux install instructions on the ubuntu site.

https://help.ubuntu.com/community/Ps3MediaServer

There's no "debug.log" in your "pmslogs.tar" !

[jupiter_spunk]

attatched the dubug,log

[jupiter_spunk]

If it helps. When I try with my xbox I get 69c00d36c4

[thoren]

Always this error "There is no inputstream to return for" with Ubuntu 11.X.
Use this thread and try this :
http://www.ps3mediaserver.org/forum/viewtopic.php?f=3&t=12737&p=60999#p60999

[jupiter_spunk]

I tried the steps in that Thread in order. Starting with mplayer version, then disabling tsmuxer.
Rebooted and restarted pms . Still getting the same error. Attatched is the debug log from that attempt.

[thoren]

Perhaps try this :
viewtopic.php?f=3&t=12737&p=61620#p61620