Config files Philips TV's 2009,2010,2011,2012

Discuss alternative media renderers (not PS3) supported by PS3 Media Server (e.g. Xbox 360, TVs &c.)

Re: Config files Philips TV's 2009,2010,2011,2012

Postby Mercuri » Sun Jan 27, 2013 4:41 pm

Good
Mercuri
 
Posts: 1
Joined: Sun Jan 27, 2013 3:18 pm

Re: Config files Philips TV's 2009,2010,2011,2012

Postby italianissimo » Sun Jan 27, 2013 5:11 pm

Sorry but I speak only Portuguese of Brazil.

I have a new Philips Smart TV 42PFL6007G/78 and is connected and typically nest on 10 MB wi-fi network, surf the Internet normally.
As I wanted to watch on TV the videos stored in my Notebook Corei3 3 GB with Windows7, searching I decided to install PS3 Media Server 1.72.0 that was free.
Was able to see my files in the Notebook and watch TV normally until yesterday, although some times giving error when trying to open video folder on my external HDD Samsung: "no files in this folder"

Today I was trying to watch some videos but the PS3 Media Server no longer shows the Philips TV icon, and when I select the TV remote the DLNA Server button no longer shows the PS3 Media Server, let alone computer directories and files. Have you checked the network and both the TV as the PS3 Media Server are visible and selected the option allowed: all devices have permission to access the media.

Below the LOG from PS3 Media Server.

I appreciate the help with a big hug.


Bom dia amigos!

Eu tenho uma nova TV Philips Smart 42PFL6007G/78 e está conectada e normalmente na ninha rede wi-fi de 10MB, navego normalmente na Internet.
Como eu queria assistir na TV os vídeos armazenados no meu Notebook Corei3, 3GB com Windows7, pesquisando eu resolvi instalar o PS3 Media Server 1.72.0 que era gratuito.
Estava conseguindo enxergar meus arquivos no Notebook e assistir na TV normalmente até ontem, apesar de alguma vezes ter dado erro ao tentar abrir pasta de vídeos no meu HDD externo Samsung: "Não há arquivos nessa pasta"

Hoje fui tentar assistir alguns vídeos mas o PS3 Média Server não mostra mais o ícone da TV Philips, e quando seleciono no controle remoto da TV o botão Servidor DLNA, não mostra mais o PS3 Media Server, muito menos os diretórios e arquivos o computador. Já verifiquei na rede e tanto a TV como o PS3 Media Server estão visíveis e selecionado a opção Permitido: Todos os dispositivos tem permissão para acessar mídia.

Abaixo o LOG do PS3 Media Server.

Agradeço a ajuda com um grande abraço.


LOG

Code: Select all
INFO 2013-01-27 10:42:16.570 [main] Starting PS3 Media Server 1.72.0
INFO 2013-01-27 10:42:16.589 [main] by shagrath / 2008-2012
INFO 2013-01-27 10:42:16.595 [main] http://ps3mediaserver.org
INFO 2013-01-27 10:42:16.596 [main] https://github.com/ps3mediaserver/ps3mediaserver
INFO 2013-01-27 10:42:16.598 [main]
INFO 2013-01-27 10:42:16.598 [main] Build: d9fd0a44c (2012-11-18)
INFO 2013-01-27 10:42:16.601 [main] Java: 1.7.0_11-Oracle Corporation
INFO 2013-01-27 10:42:16.603 [main] OS: Windows 7 x86 6.1
INFO 2013-01-27 10:42:16.605 [main] Encoding: UTF-8
INFO 2013-01-27 10:42:16.606 [main] Memory: 742 MB
INFO 2013-01-27 10:42:16.607 [main]
INFO 2013-01-27 10:42:16.607 [main] Working directory: C:\Program Files\PS3 Media Server
INFO 2013-01-27 10:42:16.615 [main] Temp directory: C:\Users\RM\AppData\Local\Temp\ps3mediaserver
INFO 2013-01-27 10:42:16.618 [main] Logging config file: C:\Program Files\PS3 Media Server\logback.xml
INFO 2013-01-27 10:42:16.619 [main] debug.log: C:\Program Files\PS3 Media Server\debug.log
INFO 2013-01-27 10:42:16.619 [main]
INFO 2013-01-27 10:42:16.619 [main] Profile directory: C:\ProgramData\PMS
INFO 2013-01-27 10:42:16.620 [main] Profile path: C:\ProgramData\PMS\PMS.conf
INFO 2013-01-27 10:42:16.621 [main] Profile permissions: rw
INFO 2013-01-27 10:42:16.621 [main] Profile name: RM-NOTEBOOK
INFO 2013-01-27 10:42:16.622 [main]
INFO 2013-01-27 10:42:16.625 [main] Loading MediaInfo library
INFO 2013-01-27 10:42:16.834 [main] Loaded MediaInfoLib - v0.7.60
INFO 2013-01-27 10:42:16.840 [main] Loading renderer configurations from C:\Program Files\PS3 Media Server\renderers
INFO 2013-01-27 10:42:16.840 [main] Loading configuration file: AirPlayer.conf
INFO 2013-01-27 10:42:16.845 [main] Loading configuration file: Android.conf
INFO 2013-01-27 10:42:16.847 [main] Loading configuration file: Bravia4500.conf
INFO 2013-01-27 10:42:16.850 [main] Loading configuration file: Bravia5500.conf
INFO 2013-01-27 10:42:16.852 [main] Loading configuration file: BraviaEX.conf
INFO 2013-01-27 10:42:16.856 [main] Loading configuration file: DirecTVHR.conf
INFO 2013-01-27 10:42:16.859 [main] Loading configuration file: DLinkDSM510.conf
INFO 2013-01-27 10:42:16.861 [main] Loading configuration file: FreeboxHD.conf
INFO 2013-01-27 10:42:16.863 [main] Loading configuration file: FreecomMusicPal.conf
INFO 2013-01-27 10:42:16.864 [main] Loading configuration file: iPad-iPhone.conf
INFO 2013-01-27 10:42:16.866 [main] Loading configuration file: Kuro.conf
INFO 2013-01-27 10:42:16.868 [main] Loading configuration file: LGST600.conf
INFO 2013-01-27 10:42:16.871 [main] Loading configuration file: N900.conf
INFO 2013-01-27 10:42:16.873 [main] Loading configuration file: OPPOBDP83.conf
INFO 2013-01-27 10:42:16.874 [main] Loading configuration file: OPPOBDP93.conf
INFO 2013-01-27 10:42:16.876 [main] Loading configuration file: Panasonic.conf
INFO 2013-01-27 10:42:16.878 [main] Loading configuration file: Philips.conf
INFO 2013-01-27 10:42:16.880 [main] Loading configuration file: PhilipsPFL.conf
INFO 2013-01-27 10:42:16.884 [main] Loading configuration file: PopcornHour.conf
INFO 2013-01-27 10:42:16.885 [main] Loading configuration file: PS3.conf
INFO 2013-01-27 10:42:16.888 [main] Loading configuration file: Realtek.conf
INFO 2013-01-27 10:42:16.890 [main] Loading configuration file: Samsung-SMT-G7400.conf
INFO 2013-01-27 10:42:16.892 [main] Loading configuration file: SamsungAllShare.conf
INFO 2013-01-27 10:42:16.894 [main] Loading configuration file: SamsungWiseLink.conf
INFO 2013-01-27 10:42:16.895 [main] Loading configuration file: Showtime3.conf
INFO 2013-01-27 10:42:16.898 [main] Loading configuration file: SMP-N100.conf
INFO 2013-01-27 10:42:16.899 [main] Loading configuration file: SonyBluray.conf
INFO 2013-01-27 10:42:16.901 [main] Loading configuration file: Streamium.conf
INFO 2013-01-27 10:42:16.902 [main] Loading configuration file: WDTVLive.conf
INFO 2013-01-27 10:42:16.904 [main] Loading configuration file: WMP.conf
INFO 2013-01-27 10:42:16.905 [main] Loading configuration file: XBMC.conf
INFO 2013-01-27 10:42:16.906 [main] Loading configuration file: XBOX360.conf
INFO 2013-01-27 10:42:16.908 [main] Loading configuration file: YamahaRXA1010.conf
INFO 2013-01-27 10:42:16.910 [main] Loading configuration file: YamahaRXV671.conf
INFO 2013-01-27 10:42:16.911 [main] Checking MPlayer font cache. It can take a minute or so.
INFO 2013-01-27 10:42:17.532 [main] Done!
INFO 2013-01-27 10:42:17.541 [main] Searching for plugins in C:\Program Files\PS3 Media Server\plugins
INFO 2013-01-27 10:42:17.544 [main] No plugins found
INFO 2013-01-27 10:42:17.564 [main] Transcoder profile AviSynth/FFmpeg will not be used because AviSynth was not found
INFO 2013-01-27 10:42:17.565 [main] Registering transcoding engine: FFmpeg Audio
INFO 2013-01-27 10:42:17.570 [main] Registering transcoding engine: MEncoder
INFO 2013-01-27 10:42:17.570 [main] Transcoder profile AviSynth/MEncoder will not be used because AviSynth was not found
INFO 2013-01-27 10:42:17.571 [main] Registering transcoding engine: FFmpeg
INFO 2013-01-27 10:42:17.572 [main] Registering transcoding engine: MPlayer Audio
INFO 2013-01-27 10:42:17.572 [main] Registering transcoding engine: FFmpeg Web Video
INFO 2013-01-27 10:42:17.573 [main] Registering transcoding engine: MEncoder Web
INFO 2013-01-27 10:42:17.573 [main] Registering transcoding engine: MPlayer Video Dump
INFO 2013-01-27 10:42:17.574 [main] Registering transcoding engine: MPlayer Web
INFO 2013-01-27 10:42:17.575 [main] Registering transcoding engine: tsMuxeR
INFO 2013-01-27 10:42:17.576 [main] Registering transcoding engine: Audio High Fidelity
INFO 2013-01-27 10:42:17.576 [main] Executable of transcoder profile VLC Audio Streaming not found
INFO 2013-01-27 10:42:17.577 [main] Executable of transcoder profile VLC Video Streaming not found
INFO 2013-01-27 10:42:17.577 [main] Registering transcoding engine: FFmpeg DVR-MS Remux
INFO 2013-01-27 10:42:17.578 [main] Registering transcoding engine: dcraw Thumbnailer
INFO 2013-01-27 10:42:17.579 [main] AviSynth is not installed. You cannot use avsmencoder as a transcoding engine.
INFO 2013-01-27 10:42:17.704 [main] Using localhost address
INFO 2013-01-27 10:42:17.704 [main] Created socket: 0.0.0.0/0.0.0.0:5001
INFO 2013-01-27 10:42:17.968 [main] Using the following UUID configured in PMS.conf: b2c0e9ab-9162-42bb-9072-339b4b640f61
INFO 2013-01-27 10:42:22.597 [main] The server should now appear on your renderer
INFO 2013-01-27 10:44:15.133 [UPNPHelper] No IP filter specified, access granted to /192.168.137.1
INFO 2013-01-27 10:47:18.439 [New I/O server worker #1-1] No IP filter specified, access granted to /127.0.0.1
INFO 2013-01-27 10:47:18.449 [pool-7-thread-1] Checking IP: 127.0.0.1 for WMP
INFO 2013-01-27 10:47:18.550 [New I/O server worker #1-2] Another renderer like WMP was found!
INFO 2013-01-27 10:47:18.553 [pool-7-thread-1] Renderer WMP found on this address: 127.0.0.1
INFO 2013-01-27 10:47:18.553 [pool-7-thread-2] Checking IP: 192.168.137.1 for WMP
INFO 2013-01-27 10:47:18.556 [pool-7-thread-2] Renderer WMP found on this address: RM-NOTEBOOK.mshome.net (192.168.137.1)
INFO 2013-01-27 10:58:14.296 [background-task-0-restart(0)] Sending BYEBYE...
INFO 2013-01-27 10:58:18.509 [background-task-0-restart(0)] Stopping server on host 192.168.137.1 and port 5001...
INFO 2013-01-27 10:58:19.681 [background-task-0-restart(0)] Using localhost address
INFO 2013-01-27 10:58:19.682 [background-task-0-restart(0)] Created socket: 0.0.0.0/0.0.0.0:5001
INFO 2013-01-27 11:33:45.580 [AWT-EventQueue-0] Setting renderer default: "Philips TV"
INFO 2013-01-27 11:36:53.596 [background-task-2-restart(1)] Sending BYEBYE...
INFO 2013-01-27 11:36:56.774 [background-task-2-restart(1)] Stopping server on host 192.168.137.1 and port 5001...
INFO 2013-01-27 11:36:57.917 [background-task-2-restart(1)] Using localhost address
INFO 2013-01-27 11:36:57.917 [background-task-2-restart(1)] Created socket: 0.0.0.0/0.0.0.0:5001
Last edited by Raptor399 on Sat Mar 23, 2013 11:23 am, edited 1 time in total.
Reason: Edited for code fragments
italianissimo
 
Posts: 1
Joined: Sun Jan 27, 2013 5:09 pm

Re: Config files Philips TV's 2009,2010,2011,2012

Postby m_stanchev » Sun Apr 21, 2013 9:18 am

Hi,
does anybody know why when I choose no encoding, external subtitles I don't get any subtitles, but when using mencoder external subtitles the subtitles are showing? I don't want to transcode the movie, but just to stream subtitles? Is there any setting that I am missing?

And another question, is there an option to change the aspect ratio via PMS? Most of the new blue ray movies are 21:9 and my TV is 16:9 so the picture is a little bit stretched and the TV player doesn't have the option to change the aspect ratio - just original and stretched? (I want to keep the original aspect ratio - the picture should touch the left and right side of the TV and above and below the picture should have black lines)
m_stanchev
 
Posts: 10
Joined: Thu Jan 17, 2013 9:12 pm

Re: Config files Philips TV's 2009,2010,2011,2012

Postby IvanBG » Wed Apr 24, 2013 10:44 pm

HEllo everyone! I am really enthusiastic about PS3 media server because all other mediaservers seemed to fail to do what I want and I am really disapointed since transcoding is only option for my philips TV
It is Philips TV from 2010 ( I installed latest firmware recently)
I downloaded latest version of PS3 Media server and isnstalled Java as required. Program detected the TV Correctly and I am using the ready settings called Philips TV, these settings should work for any 2010 model as stated in these forums (mainly marked for 8605 model)
I tried to play one movie and it played. THe problem is I am not familiar at all with this software and I dont understand what settings this profile is using for encoding.
What I am insterested is: Being able to play full HD movies encoded with h.264 or MPEG4 in mkv or mp4 container for highest possible quality. I have wired network with GIgabit network and cables are short so there should not be probleme with network speed. PC is 3 GHZ dual core AMD processor which is fast enough to do the job.
So my question is:
When using the standard settings profile file, suitable for Philips 2010 TVs (as mentioned above), in what format is the PS3 media server transcoding the movie file and with what video and audio codec? Is it only transcoding when there are subtitle files, only when file is different from compatible files or its transcoding everytime no matter the file played?
In the settings I cant find anything to alter the formats codecs options, and software is very complicated for me to understand.
I have been using Wild media server, which worked, BUT only in mpg (mpeg) containter and encoded in MPEG2!
But in the table with codeds its written that all Philips 2010 TVs including my 7605H/12 support in DLNA mkv (h264, 24 fps, at 20 Mbit/s, audio: HE-AAC, AC3, MP3, PCM), and mp4 in H264 HP at 15 or 30 fps, at maximum 20Mbit/s (audio AAC, HE-AAC(v1&v2), AC5

Trying all these combinations in wild media server and nothing. I cannot try these combinations in PS3 media server because I dont know how to set it up.

Basically, what I am looking for is High Quality Full HD video in H264, in either mkv or MPEG-4 contaioner (*mp4-which is a little better, because maximum FPS is 3- instead of 24 for MKV) to take full advantage of quality video and processor power that the TV has (pixel perice HD, motion&other stuff that makes the picture amazing in PHILIPS TV)
And at same time audio with medium quality, since I dont have any 3d setup (for now using the TVs integrated speakers)
What cointainer would you reccomend me -the mkv or MPEG4?
Thank you in advance for any advice! :)
IvanBG
 
Posts: 2
Joined: Wed Apr 24, 2013 10:23 pm

Re: Config files Philips TV's 2009,2010,2011,2012

Postby IvanBG » Fri Apr 26, 2013 3:45 pm

And something else! What about GPU hardware accelerated transcoding for AMD cards? AMD has accelerated video option for years why not use them to unload the CPU a little?
Type in google amd accelerated video and see for yourself! Any card from HD 2000 and above has it!
http://hardforum.com/showthread.php?t=1596376
IvanBG
 
Posts: 2
Joined: Wed Apr 24, 2013 10:23 pm

Re: Config files Philips TV's 2009,2010,2011,2012

Postby x5800 » Thu Mar 13, 2014 3:05 am

Any help would be super appreciated! I've read through this whole thread but I'm still having trouble playing videos from PMS on my Philips 4000 series TV (26PFL4907/F7). When I select the file on the TV it says, "Unsupported file not able to execute." On the server, under Detected media renderers it says, "Unknown Renderer" and if I switch the default renderer to "Phillips TV" I still get the same error on the TV.

Any ideas how to fix it? Thanks!!

For reference, the TV's manual says it supports the following DLNA formats:
• Playable codec : MPEG1, MPEG2
• Maximum size of a video : 1920 x 1080
• Audio type : AC3, MPEG1 audio layer 3 (MP3), MPEG1 audio layer 2, LPCM
x5800
 
Posts: 2
Joined: Thu Mar 13, 2014 2:36 am

Re: Config files Philips TV's 2009,2010,2011,2012

Postby leroy » Thu Mar 13, 2014 9:02 pm

hi x5800,

Have you tried this renderer config file?

Remember to remove the existing PhilipsPFL.conf from the renderers folder to ensure that only
this new file (with has also the name "Philips TV") is listed in the default renderer puldown list.

If it still not work properly, please the provide the debug.log.
leroy
 
Posts: 141
Joined: Sat Sep 24, 2011 11:55 am
Location: Netherlands

Re: Config files Philips TV's 2009,2010,2011,2012

Postby x5800 » Fri Mar 14, 2014 4:01 am

Leroy, thanks so much for the reply! It got me closer but not all the way.

debug.log here: http://pastebin.com/xncquFqL

Now PMS detects the TV as "Philips TV" instead of "Unknown Renderer" and the TV no longer displays, "Unsupported file not able to execute." Instead, after it appears to buffer and displays a loading animation until I get the message, "Network Error. Playback Error NE[00204697]" It sounds similar to this thread with no obvious solution: http://www.supportforum.philips.com/en/ ... es-from-PC

TV has newest firmware and can an MP4 but not MKV directly from flashdrive without problem. Cannot play either from PMS. Other Samsung tv works great with PMS.

Thoughts? Thanks in advance!
x5800
 
Posts: 2
Joined: Thu Mar 13, 2014 2:36 am

Re: Config files Philips TV's 2009,2010,2011,2012

Postby leroy » Tue Mar 18, 2014 8:09 pm

hi x5800,

In case you are using wireless connection you can try a wired one.
Also you can try some other setting for the "Transcode quality (MPEG-2)" like
"keyint=5:vqscale=2:vqmin=3 /* Good quality */"
or even
"keyint=25:vqmax=7:vqmin=2 /* Medium quality (HD Wi-Fi) */" wich reduses bandwith.

But maybe is the problem indeed as forum member MondoTech describes that the timeout delay for receiving the transcoded video stream is too low for this TV wich causes this error.
leroy
 
Posts: 141
Joined: Sat Sep 24, 2011 11:55 am
Location: Netherlands

Re: Config files Philips TV's 2009,2010,2011,2012

Postby len4ik005 » Sun Mar 23, 2014 6:34 pm

Hallo everybody,

I Hope for any help. My original goal was to connect my laptop with my Philips TV 37PFL8605K via WiFi Media player. I got the code etc, but the software is only for Windows and I have Mac. Then I read that PS3 media Server could help to solve the problem. I installed everything but it does not recognize my TV and the render cannot be found

Is it possible to use Wireless connection ? Or it needs to be always wired. If yes, why do u need it, if I could connect it with HDM cable...
after reading all posts, I wanted to get the config but could not find it for my TV here.

It would be nice to use it without annoying cables :-)

Lena
len4ik005
 
Posts: 1
Joined: Sun Mar 23, 2014 6:21 pm

PreviousNext

Return to Alternative Media Renderers

Who is online

Users browsing this forum: No registered users and 2 guests